summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--include/linux/v4l2-common.h39
-rw-r--r--include/linux/v4l2-controls.h1557
-rw-r--r--include/linux/videodev2.h93
3 files changed, 1603 insertions, 86 deletions
diff --git a/include/linux/v4l2-common.h b/include/linux/v4l2-common.h
index 14de173..c3ca11e 100644
--- a/include/linux/v4l2-common.h
+++ b/include/linux/v4l2-common.h
@@ -10,45 +10,6 @@
*
* Copyright (C) 2012 Nokia Corporation
* Contact: Sakari Ailus <sakari.ailus@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Alternatively you can redistribute this file under the terms of the
- * BSD license as stated below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * 3. The names of its contributors may not be used to endorse or promote
- * products derived from this software without specific prior written
- * permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
- * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
*/
#ifndef __V4L2_COMMON__
diff --git a/include/linux/v4l2-controls.h b/include/linux/v4l2-controls.h
index 667e256..8a33537 100644
--- a/include/linux/v4l2-controls.h
+++ b/include/linux/v4l2-controls.h
@@ -4,44 +4,6 @@
*
* Copyright (C) 1999-2012 the contributors
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Alternatively you can redistribute this file under the terms of the
- * BSD license as stated below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * 3. The names of its contributors may not be used to endorse or promote
- * products derived from this software without specific prior written
- * permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
- * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
* The contents of this header was split off from videodev2.h. All control
* definitions should be added to this header, which is included by
* videodev2.h.
@@ -128,6 +90,7 @@ enum v4l2_colorfx {
V4L2_COLORFX_SOLARIZATION = 13,
V4L2_COLORFX_ANTIQUE = 14,
V4L2_COLORFX_SET_CBCR = 15,
+ V4L2_COLORFX_SET_RGB = 16,
};
#define V4L2_CID_AUTOBRIGHTNESS (V4L2_CID_BASE+32)
#define V4L2_CID_BAND_STOP_FILTER (V4L2_CID_BASE+33)
@@ -145,14 +108,17 @@ enum v4l2_colorfx {
#define V4L2_CID_ALPHA_COMPONENT (V4L2_CID_BASE+41)
#define V4L2_CID_COLORFX_CBCR (V4L2_CID_BASE+42)
+#define V4L2_CID_COLORFX_RGB (V4L2_CID_BASE+43)
/* last CID + 1 */
-#define V4L2_CID_LASTP1 (V4L2_CID_BASE+43)
+#define V4L2_CID_LASTP1 (V4L2_CID_BASE+44)
/* USER-class private control IDs */
-/* The base for the meye driver controls. See linux/meye.h for the list
- * of controls. We reserve 16 controls for this driver. */
+/*
+ * The base for the meye driver controls. This driver was removed, but
+ * we keep this define in case any software still uses it.
+ */
#define V4L2_CID_USER_MEYE_BASE (V4L2_CID_USER_BASE + 0x1000)
/* The base for the bttv driver controls.
@@ -217,6 +183,36 @@ enum v4l2_colorfx {
*/
#define V4L2_CID_USER_ALLEGRO_BASE (V4L2_CID_USER_BASE + 0x1170)
+/*
+ * The base for the isl7998x driver controls.
+ * We reserve 16 controls for this driver.
+ */
+#define V4L2_CID_USER_ISL7998X_BASE (V4L2_CID_USER_BASE + 0x1180)
+
+/*
+ * The base for DW100 driver controls.
+ * We reserve 16 controls for this driver.
+ */
+#define V4L2_CID_USER_DW100_BASE (V4L2_CID_USER_BASE + 0x1190)
+
+/*
+ * The base for Aspeed driver controls.
+ * We reserve 16 controls for this driver.
+ */
+#define V4L2_CID_USER_ASPEED_BASE (V4L2_CID_USER_BASE + 0x11a0)
+
+/*
+ * The base for Nuvoton NPCM driver controls.
+ * We reserve 16 controls for this driver.
+ */
+#define V4L2_CID_USER_NPCM_BASE (V4L2_CID_USER_BASE + 0x11b0)
+
+/*
+ * The base for THine THP7312 driver controls.
+ * We reserve 32 controls for this driver.
+ */
+#define V4L2_CID_USER_THP7312_BASE (V4L2_CID_USER_BASE + 0x11c0)
+
/* MPEG-class control IDs */
/* The MPEG controls are applicable to all codec controls
* and the 'MPEG' part of the define is historical */
@@ -439,6 +435,11 @@ enum v4l2_mpeg_video_multi_slice_mode {
#define V4L2_CID_MPEG_VIDEO_USE_LTR_FRAMES (V4L2_CID_CODEC_BASE+234)
#define V4L2_CID_MPEG_VIDEO_DEC_CONCEAL_COLOR (V4L2_CID_CODEC_BASE+235)
#define V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD (V4L2_CID_CODEC_BASE+236)
+#define V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD_TYPE (V4L2_CID_CODEC_BASE+237)
+enum v4l2_mpeg_video_intra_refresh_period_type {
+ V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD_TYPE_RANDOM = 0,
+ V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD_TYPE_CYCLIC = 1,
+};
/* CIDs for the MPEG-2 Part 2 (H.262) codec */
#define V4L2_CID_MPEG_VIDEO_MPEG2_LEVEL (V4L2_CID_CODEC_BASE+270)
@@ -811,6 +812,88 @@ enum v4l2_mpeg_video_frame_skip_mode {
#define V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY (V4L2_CID_CODEC_BASE + 653)
#define V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY_ENABLE (V4L2_CID_CODEC_BASE + 654)
+#define V4L2_CID_MPEG_VIDEO_AV1_PROFILE (V4L2_CID_CODEC_BASE + 655)
+/**
+ * enum v4l2_mpeg_video_av1_profile - AV1 profiles
+ *
+ * @V4L2_MPEG_VIDEO_AV1_PROFILE_MAIN: compliant decoders must be able to decode
+ * streams with seq_profile equal to 0.
+ * @V4L2_MPEG_VIDEO_AV1_PROFILE_HIGH: compliant decoders must be able to decode
+ * streams with seq_profile equal less than or equal to 1.
+ * @V4L2_MPEG_VIDEO_AV1_PROFILE_PROFESSIONAL: compliant decoders must be able to
+ * decode streams with seq_profile less than or equal to 2.
+ *
+ * Conveys the highest profile a decoder can work with.
+ */
+enum v4l2_mpeg_video_av1_profile {
+ V4L2_MPEG_VIDEO_AV1_PROFILE_MAIN = 0,
+ V4L2_MPEG_VIDEO_AV1_PROFILE_HIGH = 1,
+ V4L2_MPEG_VIDEO_AV1_PROFILE_PROFESSIONAL = 2,
+};
+
+#define V4L2_CID_MPEG_VIDEO_AV1_LEVEL (V4L2_CID_CODEC_BASE + 656)
+/**
+ * enum v4l2_mpeg_video_av1_level - AV1 levels
+ *
+ * @V4L2_MPEG_VIDEO_AV1_LEVEL_2_0: Level 2.0.
+ * @V4L2_MPEG_VIDEO_AV1_LEVEL_2_1: Level 2.1.
+ * @V4L2_MPEG_VIDEO_AV1_LEVEL_2_2: Level 2.2.
+ * @V4L2_MPEG_VIDEO_AV1_LEVEL_2_3: Level 2.3.
+ * @V4L2_MPEG_VIDEO_AV1_LEVEL_3_0: Level 3.0.
+ * @V4L2_MPEG_VIDEO_AV1_LEVEL_3_1: Level 3.1.
+ * @V4L2_MPEG_VIDEO_AV1_LEVEL_3_2: Level 3.2.
+ * @V4L2_MPEG_VIDEO_AV1_LEVEL_3_3: Level 3.3.
+ * @V4L2_MPEG_VIDEO_AV1_LEVEL_4_0: Level 4.0.
+ * @V4L2_MPEG_VIDEO_AV1_LEVEL_4_1: Level 4.1.
+ * @V4L2_MPEG_VIDEO_AV1_LEVEL_4_2: Level 4.2.
+ * @V4L2_MPEG_VIDEO_AV1_LEVEL_4_3: Level 4.3.
+ * @V4L2_MPEG_VIDEO_AV1_LEVEL_5_0: Level 5.0.
+ * @V4L2_MPEG_VIDEO_AV1_LEVEL_5_1: Level 5.1.
+ * @V4L2_MPEG_VIDEO_AV1_LEVEL_5_2: Level 5.2.
+ * @V4L2_MPEG_VIDEO_AV1_LEVEL_5_3: Level 5.3.
+ * @V4L2_MPEG_VIDEO_AV1_LEVEL_6_0: Level 6.0.
+ * @V4L2_MPEG_VIDEO_AV1_LEVEL_6_1: Level 6.1.
+ * @V4L2_MPEG_VIDEO_AV1_LEVEL_6_2: Level 6.2.
+ * @V4L2_MPEG_VIDEO_AV1_LEVEL_6_3: Level 6.3.
+ * @V4L2_MPEG_VIDEO_AV1_LEVEL_7_0: Level 7.0.
+ * @V4L2_MPEG_VIDEO_AV1_LEVEL_7_1: Level 7.1.
+ * @V4L2_MPEG_VIDEO_AV1_LEVEL_7_2: Level 7.2.
+ * @V4L2_MPEG_VIDEO_AV1_LEVEL_7_3: Level 7.3.
+ *
+ * Conveys the highest level a decoder can work with.
+ */
+enum v4l2_mpeg_video_av1_level {
+ V4L2_MPEG_VIDEO_AV1_LEVEL_2_0 = 0,
+ V4L2_MPEG_VIDEO_AV1_LEVEL_2_1 = 1,
+ V4L2_MPEG_VIDEO_AV1_LEVEL_2_2 = 2,
+ V4L2_MPEG_VIDEO_AV1_LEVEL_2_3 = 3,
+
+ V4L2_MPEG_VIDEO_AV1_LEVEL_3_0 = 4,
+ V4L2_MPEG_VIDEO_AV1_LEVEL_3_1 = 5,
+ V4L2_MPEG_VIDEO_AV1_LEVEL_3_2 = 6,
+ V4L2_MPEG_VIDEO_AV1_LEVEL_3_3 = 7,
+
+ V4L2_MPEG_VIDEO_AV1_LEVEL_4_0 = 8,
+ V4L2_MPEG_VIDEO_AV1_LEVEL_4_1 = 9,
+ V4L2_MPEG_VIDEO_AV1_LEVEL_4_2 = 10,
+ V4L2_MPEG_VIDEO_AV1_LEVEL_4_3 = 11,
+
+ V4L2_MPEG_VIDEO_AV1_LEVEL_5_0 = 12,
+ V4L2_MPEG_VIDEO_AV1_LEVEL_5_1 = 13,
+ V4L2_MPEG_VIDEO_AV1_LEVEL_5_2 = 14,
+ V4L2_MPEG_VIDEO_AV1_LEVEL_5_3 = 15,
+
+ V4L2_MPEG_VIDEO_AV1_LEVEL_6_0 = 16,
+ V4L2_MPEG_VIDEO_AV1_LEVEL_6_1 = 17,
+ V4L2_MPEG_VIDEO_AV1_LEVEL_6_2 = 18,
+ V4L2_MPEG_VIDEO_AV1_LEVEL_6_3 = 19,
+
+ V4L2_MPEG_VIDEO_AV1_LEVEL_7_0 = 20,
+ V4L2_MPEG_VIDEO_AV1_LEVEL_7_1 = 21,
+ V4L2_MPEG_VIDEO_AV1_LEVEL_7_2 = 22,
+ V4L2_MPEG_VIDEO_AV1_LEVEL_7_3 = 23
+};
+
/* MPEG-class control IDs specific to the CX2341x driver as defined by V4L2 */
#define V4L2_CID_CODEC_CX2341X_BASE (V4L2_CTRL_CLASS_CODEC | 0x1000)
#define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE (V4L2_CID_CODEC_CX2341X_BASE+0)
@@ -998,6 +1081,8 @@ enum v4l2_auto_focus_range {
#define V4L2_CID_CAMERA_SENSOR_ROTATION (V4L2_CID_CAMERA_CLASS_BASE+35)
+#define V4L2_CID_HDR_SENSOR_MODE (V4L2_CID_CAMERA_CLASS_BASE+36)
+
/* FM Modulator class control IDs */
#define V4L2_CID_FM_TX_CLASS_BASE (V4L2_CTRL_CLASS_FM_TX | 0x900)
@@ -1559,6 +1644,8 @@ struct v4l2_h264_dpb_entry {
#define V4L2_H264_DECODE_PARAM_FLAG_IDR_PIC 0x01
#define V4L2_H264_DECODE_PARAM_FLAG_FIELD_PIC 0x02
#define V4L2_H264_DECODE_PARAM_FLAG_BOTTOM_FIELD 0x04
+#define V4L2_H264_DECODE_PARAM_FLAG_PFRAME 0x08
+#define V4L2_H264_DECODE_PARAM_FLAG_BFRAME 0x10
#define V4L2_CID_STATELESS_H264_DECODE_PARAMS (V4L2_CID_CODEC_STATELESS_BASE + 7)
/**
@@ -1713,7 +1800,7 @@ struct v4l2_vp8_segment {
* @sharpness_level: matches sharpness_level syntax element.
* @level: matches loop_filter_level syntax element.
* @padding: padding field. Should be zeroed by applications.
- * @flags: see V4L2_VP8_LF_FLAG_{}.
+ * @flags: see V4L2_VP8_LF_{}.
*
* This structure contains loop filter related parameters.
* See the 'mb_lf_adjustments()' part of the frame header syntax,
@@ -1980,6 +2067,469 @@ struct v4l2_ctrl_mpeg2_quantisation {
__u8 chroma_non_intra_quantiser_matrix[64];
};
+#define V4L2_CID_STATELESS_HEVC_SPS (V4L2_CID_CODEC_STATELESS_BASE + 400)
+#define V4L2_CID_STATELESS_HEVC_PPS (V4L2_CID_CODEC_STATELESS_BASE + 401)
+#define V4L2_CID_STATELESS_HEVC_SLICE_PARAMS (V4L2_CID_CODEC_STATELESS_BASE + 402)
+#define V4L2_CID_STATELESS_HEVC_SCALING_MATRIX (V4L2_CID_CODEC_STATELESS_BASE + 403)
+#define V4L2_CID_STATELESS_HEVC_DECODE_PARAMS (V4L2_CID_CODEC_STATELESS_BASE + 404)
+#define V4L2_CID_STATELESS_HEVC_DECODE_MODE (V4L2_CID_CODEC_STATELESS_BASE + 405)
+#define V4L2_CID_STATELESS_HEVC_START_CODE (V4L2_CID_CODEC_STATELESS_BASE + 406)
+#define V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS (V4L2_CID_CODEC_STATELESS_BASE + 407)
+
+enum v4l2_stateless_hevc_decode_mode {
+ V4L2_STATELESS_HEVC_DECODE_MODE_SLICE_BASED,
+ V4L2_STATELESS_HEVC_DECODE_MODE_FRAME_BASED,
+};
+
+enum v4l2_stateless_hevc_start_code {
+ V4L2_STATELESS_HEVC_START_CODE_NONE,
+ V4L2_STATELESS_HEVC_START_CODE_ANNEX_B,
+};
+
+#define V4L2_HEVC_SLICE_TYPE_B 0
+#define V4L2_HEVC_SLICE_TYPE_P 1
+#define V4L2_HEVC_SLICE_TYPE_I 2
+
+#define V4L2_HEVC_SPS_FLAG_SEPARATE_COLOUR_PLANE (1ULL << 0)
+#define V4L2_HEVC_SPS_FLAG_SCALING_LIST_ENABLED (1ULL << 1)
+#define V4L2_HEVC_SPS_FLAG_AMP_ENABLED (1ULL << 2)
+#define V4L2_HEVC_SPS_FLAG_SAMPLE_ADAPTIVE_OFFSET (1ULL << 3)
+#define V4L2_HEVC_SPS_FLAG_PCM_ENABLED (1ULL << 4)
+#define V4L2_HEVC_SPS_FLAG_PCM_LOOP_FILTER_DISABLED (1ULL << 5)
+#define V4L2_HEVC_SPS_FLAG_LONG_TERM_REF_PICS_PRESENT (1ULL << 6)
+#define V4L2_HEVC_SPS_FLAG_SPS_TEMPORAL_MVP_ENABLED (1ULL << 7)
+#define V4L2_HEVC_SPS_FLAG_STRONG_INTRA_SMOOTHING_ENABLED (1ULL << 8)
+
+/**
+ * struct v4l2_ctrl_hevc_sps - ITU-T Rec. H.265: Sequence parameter set
+ *
+ * @video_parameter_set_id: specifies the value of the
+ * vps_video_parameter_set_id of the active VPS
+ * @seq_parameter_set_id: provides an identifier for the SPS for
+ * reference by other syntax elements
+ * @pic_width_in_luma_samples: specifies the width of each decoded picture
+ * in units of luma samples
+ * @pic_height_in_luma_samples: specifies the height of each decoded picture
+ * in units of luma samples
+ * @bit_depth_luma_minus8: this value plus 8specifies the bit depth of the
+ * samples of the luma array
+ * @bit_depth_chroma_minus8: this value plus 8 specifies the bit depth of the
+ * samples of the chroma arrays
+ * @log2_max_pic_order_cnt_lsb_minus4: this value plus 4 specifies the value of
+ * the variable MaxPicOrderCntLsb
+ * @sps_max_dec_pic_buffering_minus1: this value plus 1 specifies the maximum
+ * required size of the decoded picture
+ * buffer for the codec video sequence
+ * @sps_max_num_reorder_pics: indicates the maximum allowed number of pictures
+ * @sps_max_latency_increase_plus1: not equal to 0 is used to compute the
+ * value of SpsMaxLatencyPictures array
+ * @log2_min_luma_coding_block_size_minus3: plus 3 specifies the minimum
+ * luma coding block size
+ * @log2_diff_max_min_luma_coding_block_size: specifies the difference between
+ * the maximum and minimum luma
+ * coding block size
+ * @log2_min_luma_transform_block_size_minus2: plus 2 specifies the minimum luma
+ * transform block size
+ * @log2_diff_max_min_luma_transform_block_size: specifies the difference between
+ * the maximum and minimum luma
+ * transform block size
+ * @max_transform_hierarchy_depth_inter: specifies the maximum hierarchy
+ * depth for transform units of
+ * coding units coded in inter
+ * prediction mode
+ * @max_transform_hierarchy_depth_intra: specifies the maximum hierarchy
+ * depth for transform units of
+ * coding units coded in intra
+ * prediction mode
+ * @pcm_sample_bit_depth_luma_minus1: this value plus 1 specifies the number of
+ * bits used to represent each of PCM sample
+ * values of the luma component
+ * @pcm_sample_bit_depth_chroma_minus1: this value plus 1 specifies the number
+ * of bits used to represent each of PCM
+ * sample values of the chroma components
+ * @log2_min_pcm_luma_coding_block_size_minus3: this value plus 3 specifies the
+ * minimum size of coding blocks
+ * @log2_diff_max_min_pcm_luma_coding_block_size: specifies the difference between
+ * the maximum and minimum size of
+ * coding blocks
+ * @num_short_term_ref_pic_sets: specifies the number of st_ref_pic_set()
+ * syntax structures included in the SPS
+ * @num_long_term_ref_pics_sps: specifies the number of candidate long-term
+ * reference pictures that are specified in the SPS
+ * @chroma_format_idc: specifies the chroma sampling
+ * @sps_max_sub_layers_minus1: this value plus 1 specifies the maximum number
+ * of temporal sub-layers
+ * @reserved: padding field. Should be zeroed by applications.
+ * @flags: see V4L2_HEVC_SPS_FLAG_{}
+ */
+struct v4l2_ctrl_hevc_sps {
+ __u8 video_parameter_set_id;
+ __u8 seq_parameter_set_id;
+ __u16 pic_width_in_luma_samples;
+ __u16 pic_height_in_luma_samples;
+ __u8 bit_depth_luma_minus8;
+ __u8 bit_depth_chroma_minus8;
+ __u8 log2_max_pic_order_cnt_lsb_minus4;
+ __u8 sps_max_dec_pic_buffering_minus1;
+ __u8 sps_max_num_reorder_pics;
+ __u8 sps_max_latency_increase_plus1;
+ __u8 log2_min_luma_coding_block_size_minus3;
+ __u8 log2_diff_max_min_luma_coding_block_size;
+ __u8 log2_min_luma_transform_block_size_minus2;
+ __u8 log2_diff_max_min_luma_transform_block_size;
+ __u8 max_transform_hierarchy_depth_inter;
+ __u8 max_transform_hierarchy_depth_intra;
+ __u8 pcm_sample_bit_depth_luma_minus1;
+ __u8 pcm_sample_bit_depth_chroma_minus1;
+ __u8 log2_min_pcm_luma_coding_block_size_minus3;
+ __u8 log2_diff_max_min_pcm_luma_coding_block_size;
+ __u8 num_short_term_ref_pic_sets;
+ __u8 num_long_term_ref_pics_sps;
+ __u8 chroma_format_idc;
+ __u8 sps_max_sub_layers_minus1;
+
+ __u8 reserved[6];
+ __u64 flags;
+};
+
+#define V4L2_HEVC_PPS_FLAG_DEPENDENT_SLICE_SEGMENT_ENABLED (1ULL << 0)
+#define V4L2_HEVC_PPS_FLAG_OUTPUT_FLAG_PRESENT (1ULL << 1)
+#define V4L2_HEVC_PPS_FLAG_SIGN_DATA_HIDING_ENABLED (1ULL << 2)
+#define V4L2_HEVC_PPS_FLAG_CABAC_INIT_PRESENT (1ULL << 3)
+#define V4L2_HEVC_PPS_FLAG_CONSTRAINED_INTRA_PRED (1ULL << 4)
+#define V4L2_HEVC_PPS_FLAG_TRANSFORM_SKIP_ENABLED (1ULL << 5)
+#define V4L2_HEVC_PPS_FLAG_CU_QP_DELTA_ENABLED (1ULL << 6)
+#define V4L2_HEVC_PPS_FLAG_PPS_SLICE_CHROMA_QP_OFFSETS_PRESENT (1ULL << 7)
+#define V4L2_HEVC_PPS_FLAG_WEIGHTED_PRED (1ULL << 8)
+#define V4L2_HEVC_PPS_FLAG_WEIGHTED_BIPRED (1ULL << 9)
+#define V4L2_HEVC_PPS_FLAG_TRANSQUANT_BYPASS_ENABLED (1ULL << 10)
+#define V4L2_HEVC_PPS_FLAG_TILES_ENABLED (1ULL << 11)
+#define V4L2_HEVC_PPS_FLAG_ENTROPY_CODING_SYNC_ENABLED (1ULL << 12)
+#define V4L2_HEVC_PPS_FLAG_LOOP_FILTER_ACROSS_TILES_ENABLED (1ULL << 13)
+#define V4L2_HEVC_PPS_FLAG_PPS_LOOP_FILTER_ACROSS_SLICES_ENABLED (1ULL << 14)
+#define V4L2_HEVC_PPS_FLAG_DEBLOCKING_FILTER_OVERRIDE_ENABLED (1ULL << 15)
+#define V4L2_HEVC_PPS_FLAG_PPS_DISABLE_DEBLOCKING_FILTER (1ULL << 16)
+#define V4L2_HEVC_PPS_FLAG_LISTS_MODIFICATION_PRESENT (1ULL << 17)
+#define V4L2_HEVC_PPS_FLAG_SLICE_SEGMENT_HEADER_EXTENSION_PRESENT (1ULL << 18)
+#define V4L2_HEVC_PPS_FLAG_DEBLOCKING_FILTER_CONTROL_PRESENT (1ULL << 19)
+#define V4L2_HEVC_PPS_FLAG_UNIFORM_SPACING (1ULL << 20)
+
+/**
+ * struct v4l2_ctrl_hevc_pps - ITU-T Rec. H.265: Picture parameter set
+ *
+ * @pic_parameter_set_id: identifies the PPS for reference by other
+ * syntax elements
+ * @num_extra_slice_header_bits: specifies the number of extra slice header
+ * bits that are present in the slice header RBSP
+ * for coded pictures referring to the PPS.
+ * @num_ref_idx_l0_default_active_minus1: this value plus 1 specifies the
+ * inferred value of num_ref_idx_l0_active_minus1
+ * @num_ref_idx_l1_default_active_minus1: this value plus 1 specifies the
+ * inferred value of num_ref_idx_l1_active_minus1
+ * @init_qp_minus26: this value plus 26 specifies the initial value of SliceQp Y for
+ * each slice referring to the PPS
+ * @diff_cu_qp_delta_depth: specifies the difference between the luma coding
+ * tree block size and the minimum luma coding block
+ * size of coding units that convey cu_qp_delta_abs
+ * and cu_qp_delta_sign_flag
+ * @pps_cb_qp_offset: specify the offsets to the luma quantization parameter Cb
+ * @pps_cr_qp_offset: specify the offsets to the luma quantization parameter Cr
+ * @num_tile_columns_minus1: this value plus 1 specifies the number of tile columns
+ * partitioning the picture
+ * @num_tile_rows_minus1: this value plus 1 specifies the number of tile rows partitioning
+ * the picture
+ * @column_width_minus1: this value plus 1 specifies the width of the each tile column in
+ * units of coding tree blocks
+ * @row_height_minus1: this value plus 1 specifies the height of the each tile row in
+ * units of coding tree blocks
+ * @pps_beta_offset_div2: specify the default deblocking parameter offsets for
+ * beta divided by 2
+ * @pps_tc_offset_div2: specify the default deblocking parameter offsets for tC
+ * divided by 2
+ * @log2_parallel_merge_level_minus2: this value plus 2 specifies the value of
+ * the variable Log2ParMrgLevel
+ * @reserved: padding field. Should be zeroed by applications.
+ * @flags: see V4L2_HEVC_PPS_FLAG_{}
+ */
+struct v4l2_ctrl_hevc_pps {
+ __u8 pic_parameter_set_id;
+ __u8 num_extra_slice_header_bits;
+ __u8 num_ref_idx_l0_default_active_minus1;
+ __u8 num_ref_idx_l1_default_active_minus1;
+ __s8 init_qp_minus26;
+ __u8 diff_cu_qp_delta_depth;
+ __s8 pps_cb_qp_offset;
+ __s8 pps_cr_qp_offset;
+ __u8 num_tile_columns_minus1;
+ __u8 num_tile_rows_minus1;
+ __u8 column_width_minus1[20];
+ __u8 row_height_minus1[22];
+ __s8 pps_beta_offset_div2;
+ __s8 pps_tc_offset_div2;
+ __u8 log2_parallel_merge_level_minus2;
+ __u8 reserved;
+ __u64 flags;
+};
+
+#define V4L2_HEVC_DPB_ENTRY_LONG_TERM_REFERENCE 0x01
+
+#define V4L2_HEVC_SEI_PIC_STRUCT_FRAME 0
+#define V4L2_HEVC_SEI_PIC_STRUCT_TOP_FIELD 1
+#define V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_FIELD 2
+#define V4L2_HEVC_SEI_PIC_STRUCT_TOP_BOTTOM 3
+#define V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_TOP 4
+#define V4L2_HEVC_SEI_PIC_STRUCT_TOP_BOTTOM_TOP 5
+#define V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_TOP_BOTTOM 6
+#define V4L2_HEVC_SEI_PIC_STRUCT_FRAME_DOUBLING 7
+#define V4L2_HEVC_SEI_PIC_STRUCT_FRAME_TRIPLING 8
+#define V4L2_HEVC_SEI_PIC_STRUCT_TOP_PAIRED_PREVIOUS_BOTTOM 9
+#define V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_PAIRED_PREVIOUS_TOP 10
+#define V4L2_HEVC_SEI_PIC_STRUCT_TOP_PAIRED_NEXT_BOTTOM 11
+#define V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_PAIRED_NEXT_TOP 12
+
+#define V4L2_HEVC_DPB_ENTRIES_NUM_MAX 16
+
+/**
+ * struct v4l2_hevc_dpb_entry - HEVC decoded picture buffer entry
+ *
+ * @timestamp: timestamp of the V4L2 capture buffer to use as reference.
+ * @flags: long term flag for the reference frame
+ * @field_pic: whether the reference is a field picture or a frame.
+ * @reserved: padding field. Should be zeroed by applications.
+ * @pic_order_cnt_val: the picture order count of the current picture.
+ */
+struct v4l2_hevc_dpb_entry {
+ __u64 timestamp;
+ __u8 flags;
+ __u8 field_pic;
+ __u16 reserved;
+ __s32 pic_order_cnt_val;
+};
+
+/**
+ * struct v4l2_hevc_pred_weight_table - HEVC weighted prediction parameters
+ *
+ * @delta_luma_weight_l0: the difference of the weighting factor applied
+ * to the luma prediction value for list 0
+ * @luma_offset_l0: the additive offset applied to the luma prediction value
+ * for list 0
+ * @delta_chroma_weight_l0: the difference of the weighting factor applied
+ * to the chroma prediction values for list 0
+ * @chroma_offset_l0: the difference of the additive offset applied to
+ * the chroma prediction values for list 0
+ * @delta_luma_weight_l1: the difference of the weighting factor applied
+ * to the luma prediction value for list 1
+ * @luma_offset_l1: the additive offset applied to the luma prediction value
+ * for list 1
+ * @delta_chroma_weight_l1: the difference of the weighting factor applied
+ * to the chroma prediction values for list 1
+ * @chroma_offset_l1: the difference of the additive offset applied to
+ * the chroma prediction values for list 1
+ * @luma_log2_weight_denom: the base 2 logarithm of the denominator for
+ * all luma weighting factors
+ * @delta_chroma_log2_weight_denom: the difference of the base 2 logarithm
+ * of the denominator for all chroma
+ * weighting factors
+ */
+struct v4l2_hevc_pred_weight_table {
+ __s8 delta_luma_weight_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
+ __s8 luma_offset_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
+ __s8 delta_chroma_weight_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2];
+ __s8 chroma_offset_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2];
+
+ __s8 delta_luma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
+ __s8 luma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
+ __s8 delta_chroma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2];
+ __s8 chroma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2];
+
+ __u8 luma_log2_weight_denom;
+ __s8 delta_chroma_log2_weight_denom;
+};
+
+#define V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_SAO_LUMA (1ULL << 0)
+#define V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_SAO_CHROMA (1ULL << 1)
+#define V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_TEMPORAL_MVP_ENABLED (1ULL << 2)
+#define V4L2_HEVC_SLICE_PARAMS_FLAG_MVD_L1_ZERO (1ULL << 3)
+#define V4L2_HEVC_SLICE_PARAMS_FLAG_CABAC_INIT (1ULL << 4)
+#define V4L2_HEVC_SLICE_PARAMS_FLAG_COLLOCATED_FROM_L0 (1ULL << 5)
+#define V4L2_HEVC_SLICE_PARAMS_FLAG_USE_INTEGER_MV (1ULL << 6)
+#define V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_DEBLOCKING_FILTER_DISABLED (1ULL << 7)
+#define V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_LOOP_FILTER_ACROSS_SLICES_ENABLED (1ULL << 8)
+#define V4L2_HEVC_SLICE_PARAMS_FLAG_DEPENDENT_SLICE_SEGMENT (1ULL << 9)
+
+/**
+ * struct v4l2_ctrl_hevc_slice_params - HEVC slice parameters
+ *
+ * This control is a dynamically sized 1-dimensional array,
+ * V4L2_CTRL_FLAG_DYNAMIC_ARRAY flag must be set when using it.
+ *
+ * @bit_size: size (in bits) of the current slice data
+ * @data_byte_offset: offset (in bytes) to the video data in the current slice data
+ * @num_entry_point_offsets: specifies the number of entry point offset syntax
+ * elements in the slice header.
+ * @nal_unit_type: specifies the coding type of the slice (B, P or I)
+ * @nuh_temporal_id_plus1: minus 1 specifies a temporal identifier for the NAL unit
+ * @slice_type: see V4L2_HEVC_SLICE_TYPE_{}
+ * @colour_plane_id: specifies the colour plane associated with the current slice
+ * @slice_pic_order_cnt: specifies the picture order count
+ * @num_ref_idx_l0_active_minus1: this value plus 1 specifies the maximum
+ * reference index for reference picture list 0
+ * that may be used to decode the slice
+ * @num_ref_idx_l1_active_minus1: this value plus 1 specifies the maximum
+ * reference index for reference picture list 1
+ * that may be used to decode the slice
+ * @collocated_ref_idx: specifies the reference index of the collocated picture used
+ * for temporal motion vector prediction
+ * @five_minus_max_num_merge_cand: specifies the maximum number of merging
+ * motion vector prediction candidates supported in
+ * the slice subtracted from 5
+ * @slice_qp_delta: specifies the initial value of QpY to be used for the coding
+ * blocks in the slice
+ * @slice_cb_qp_offset: specifies a difference to be added to the value of pps_cb_qp_offset
+ * @slice_cr_qp_offset: specifies a difference to be added to the value of pps_cr_qp_offset
+ * @slice_act_y_qp_offset: screen content extension parameters
+ * @slice_act_cb_qp_offset: screen content extension parameters
+ * @slice_act_cr_qp_offset: screen content extension parameters
+ * @slice_beta_offset_div2: specify the deblocking parameter offsets for beta divided by 2
+ * @slice_tc_offset_div2: specify the deblocking parameter offsets for tC divided by 2
+ * @pic_struct: indicates whether a picture should be displayed as a frame or as one or
+ * more fields
+ * @reserved0: padding field. Should be zeroed by applications.
+ * @slice_segment_addr: specifies the address of the first coding tree block in
+ * the slice segment
+ * @ref_idx_l0: the list of L0 reference elements as indices in the DPB
+ * @ref_idx_l1: the list of L1 reference elements as indices in the DPB
+ * @short_term_ref_pic_set_size: specifies the size of short-term reference
+ * pictures set included in the SPS
+ * @long_term_ref_pic_set_size: specifies the size of long-term reference
+ * pictures set include in the SPS
+ * @pred_weight_table: the prediction weight coefficients for inter-picture
+ * prediction
+ * @reserved1: padding field. Should be zeroed by applications.
+ * @flags: see V4L2_HEVC_SLICE_PARAMS_FLAG_{}
+ */
+struct v4l2_ctrl_hevc_slice_params {
+ __u32 bit_size;
+ __u32 data_byte_offset;
+ __u32 num_entry_point_offsets;
+
+ /* ISO/IEC 23008-2, ITU-T Rec. H.265: NAL unit header */
+ __u8 nal_unit_type;
+ __u8 nuh_temporal_id_plus1;
+
+ /* ISO/IEC 23008-2, ITU-T Rec. H.265: General slice segment header */
+ __u8 slice_type;
+ __u8 colour_plane_id;
+ __s32 slice_pic_order_cnt;
+ __u8 num_ref_idx_l0_active_minus1;
+ __u8 num_ref_idx_l1_active_minus1;
+ __u8 collocated_ref_idx;
+ __u8 five_minus_max_num_merge_cand;
+ __s8 slice_qp_delta;
+ __s8 slice_cb_qp_offset;
+ __s8 slice_cr_qp_offset;
+ __s8 slice_act_y_qp_offset;
+ __s8 slice_act_cb_qp_offset;
+ __s8 slice_act_cr_qp_offset;
+ __s8 slice_beta_offset_div2;
+ __s8 slice_tc_offset_div2;
+
+ /* ISO/IEC 23008-2, ITU-T Rec. H.265: Picture timing SEI message */
+ __u8 pic_struct;
+
+ __u8 reserved0[3];
+ /* ISO/IEC 23008-2, ITU-T Rec. H.265: General slice segment header */
+ __u32 slice_segment_addr;
+ __u8 ref_idx_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
+ __u8 ref_idx_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
+ __u16 short_term_ref_pic_set_size;
+ __u16 long_term_ref_pic_set_size;
+
+ /* ISO/IEC 23008-2, ITU-T Rec. H.265: Weighted prediction parameter */
+ struct v4l2_hevc_pred_weight_table pred_weight_table;
+
+ __u8 reserved1[2];
+ __u64 flags;
+};
+
+#define V4L2_HEVC_DECODE_PARAM_FLAG_IRAP_PIC 0x1
+#define V4L2_HEVC_DECODE_PARAM_FLAG_IDR_PIC 0x2
+#define V4L2_HEVC_DECODE_PARAM_FLAG_NO_OUTPUT_OF_PRIOR 0x4
+
+/**
+ * struct v4l2_ctrl_hevc_decode_params - HEVC decode parameters
+ *
+ * @pic_order_cnt_val: picture order count
+ * @short_term_ref_pic_set_size: specifies the size of short-term reference
+ * pictures set included in the SPS of the first slice
+ * @long_term_ref_pic_set_size: specifies the size of long-term reference
+ * pictures set include in the SPS of the first slice
+ * @num_active_dpb_entries: the number of entries in dpb
+ * @num_poc_st_curr_before: the number of reference pictures in the short-term
+ * set that come before the current frame
+ * @num_poc_st_curr_after: the number of reference pictures in the short-term
+ * set that come after the current frame
+ * @num_poc_lt_curr: the number of reference pictures in the long-term set
+ * @poc_st_curr_before: provides the index of the short term before references
+ * in DPB array
+ * @poc_st_curr_after: provides the index of the short term after references
+ * in DPB array
+ * @poc_lt_curr: provides the index of the long term references in DPB array
+ * @num_delta_pocs_of_ref_rps_idx: same as the derived value NumDeltaPocs[RefRpsIdx],
+ * can be used to parse the RPS data in slice headers
+ * instead of skipping it with @short_term_ref_pic_set_size.
+ * @reserved: padding field. Should be zeroed by applications.
+ * @dpb: the decoded picture buffer, for meta-data about reference frames
+ * @flags: see V4L2_HEVC_DECODE_PARAM_FLAG_{}
+ */
+struct v4l2_ctrl_hevc_decode_params {
+ __s32 pic_order_cnt_val;
+ __u16 short_term_ref_pic_set_size;
+ __u16 long_term_ref_pic_set_size;
+ __u8 num_active_dpb_entries;
+ __u8 num_poc_st_curr_before;
+ __u8 num_poc_st_curr_after;
+ __u8 num_poc_lt_curr;
+ __u8 poc_st_curr_before[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
+ __u8 poc_st_curr_after[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
+ __u8 poc_lt_curr[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
+ __u8 num_delta_pocs_of_ref_rps_idx;
+ __u8 reserved[3];
+ struct v4l2_hevc_dpb_entry dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
+ __u64 flags;
+};
+
+/**
+ * struct v4l2_ctrl_hevc_scaling_matrix - HEVC scaling lists parameters
+ *
+ * @scaling_list_4x4: scaling list is used for the scaling process for
+ * transform coefficients. The values on each scaling
+ * list are expected in raster scan order
+ * @scaling_list_8x8: scaling list is used for the scaling process for
+ * transform coefficients. The values on each scaling
+ * list are expected in raster scan order
+ * @scaling_list_16x16: scaling list is used for the scaling process for
+ * transform coefficients. The values on each scaling
+ * list are expected in raster scan order
+ * @scaling_list_32x32: scaling list is used for the scaling process for
+ * transform coefficients. The values on each scaling
+ * list are expected in raster scan order
+ * @scaling_list_dc_coef_16x16: scaling list is used for the scaling process
+ * for transform coefficients. The values on each
+ * scaling list are expected in raster scan order.
+ * @scaling_list_dc_coef_32x32: scaling list is used for the scaling process
+ * for transform coefficients. The values on each
+ * scaling list are expected in raster scan order.
+ */
+struct v4l2_ctrl_hevc_scaling_matrix {
+ __u8 scaling_list_4x4[6][16];
+ __u8 scaling_list_8x8[6][64];
+ __u8 scaling_list_16x16[6][64];
+ __u8 scaling_list_32x32[2][64];
+ __u8 scaling_list_dc_coef_16x16[6];
+ __u8 scaling_list_dc_coef_32x32[2];
+};
+
#define V4L2_CID_COLORIMETRY_CLASS_BASE (V4L2_CTRL_CLASS_COLORIMETRY | 0x900)
#define V4L2_CID_COLORIMETRY_CLASS (V4L2_CTRL_CLASS_COLORIMETRY | 1)
@@ -2014,6 +2564,929 @@ struct v4l2_ctrl_hdr10_mastering_display {
__u32 min_display_mastering_luminance;
};
+/* Stateless VP9 controls */
+
+#define V4L2_VP9_LOOP_FILTER_FLAG_DELTA_ENABLED 0x1
+#define V4L2_VP9_LOOP_FILTER_FLAG_DELTA_UPDATE 0x2
+
+/**
+ * struct v4l2_vp9_loop_filter - VP9 loop filter parameters
+ *
+ * @ref_deltas: contains the adjustment needed for the filter level based on the
+ * chosen reference frame. If this syntax element is not present in the bitstream,
+ * users should pass its last value.
+ * @mode_deltas: contains the adjustment needed for the filter level based on the
+ * chosen mode. If this syntax element is not present in the bitstream, users should
+ * pass its last value.
+ * @level: indicates the loop filter strength.
+ * @sharpness: indicates the sharpness level.
+ * @flags: combination of V4L2_VP9_LOOP_FILTER_FLAG_{} flags.
+ * @reserved: padding field. Should be zeroed by applications.
+ *
+ * This structure contains all loop filter related parameters. See sections
+ * '7.2.8 Loop filter semantics' of the VP9 specification for more details.
+ */
+struct v4l2_vp9_loop_filter {
+ __s8 ref_deltas[4];
+ __s8 mode_deltas[2];
+ __u8 level;
+ __u8 sharpness;
+ __u8 flags;
+ __u8 reserved[7];
+};
+
+/**
+ * struct v4l2_vp9_quantization - VP9 quantization parameters
+ *
+ * @base_q_idx: indicates the base frame qindex.
+ * @delta_q_y_dc: indicates the Y DC quantizer relative to base_q_idx.
+ * @delta_q_uv_dc: indicates the UV DC quantizer relative to base_q_idx.
+ * @delta_q_uv_ac: indicates the UV AC quantizer relative to base_q_idx.
+ * @reserved: padding field. Should be zeroed by applications.
+ *
+ * Encodes the quantization parameters. See section '7.2.9 Quantization params
+ * syntax' of the VP9 specification for more details.
+ */
+struct v4l2_vp9_quantization {
+ __u8 base_q_idx;
+ __s8 delta_q_y_dc;
+ __s8 delta_q_uv_dc;
+ __s8 delta_q_uv_ac;
+ __u8 reserved[4];
+};
+
+#define V4L2_VP9_SEGMENTATION_FLAG_ENABLED 0x01
+#define V4L2_VP9_SEGMENTATION_FLAG_UPDATE_MAP 0x02
+#define V4L2_VP9_SEGMENTATION_FLAG_TEMPORAL_UPDATE 0x04
+#define V4L2_VP9_SEGMENTATION_FLAG_UPDATE_DATA 0x08
+#define V4L2_VP9_SEGMENTATION_FLAG_ABS_OR_DELTA_UPDATE 0x10
+
+#define V4L2_VP9_SEG_LVL_ALT_Q 0
+#define V4L2_VP9_SEG_LVL_ALT_L 1
+#define V4L2_VP9_SEG_LVL_REF_FRAME 2
+#define V4L2_VP9_SEG_LVL_SKIP 3
+#define V4L2_VP9_SEG_LVL_MAX 4
+
+#define V4L2_VP9_SEGMENT_FEATURE_ENABLED(id) (1 << (id))
+#define V4L2_VP9_SEGMENT_FEATURE_ENABLED_MASK 0xf
+
+/**
+ * struct v4l2_vp9_segmentation - VP9 segmentation parameters
+ *
+ * @feature_data: data attached to each feature. Data entry is only valid if
+ * the feature is enabled. The array shall be indexed with segment number as
+ * the first dimension (0..7) and one of V4L2_VP9_SEG_{} as the second dimension.
+ * @feature_enabled: bitmask defining which features are enabled in each segment.
+ * The value for each segment is a combination of V4L2_VP9_SEGMENT_FEATURE_ENABLED(id)
+ * values where id is one of V4L2_VP9_SEG_LVL_{}.
+ * @tree_probs: specifies the probability values to be used when decoding a
+ * Segment-ID. See '5.15. Segmentation map' section of the VP9 specification
+ * for more details.
+ * @pred_probs: specifies the probability values to be used when decoding a
+ * Predicted-Segment-ID. See '6.4.14. Get segment id syntax' section of :ref:`vp9`
+ * for more details.
+ * @flags: combination of V4L2_VP9_SEGMENTATION_FLAG_{} flags.
+ * @reserved: padding field. Should be zeroed by applications.
+ *
+ * Encodes the quantization parameters. See section '7.2.10 Segmentation params syntax' of
+ * the VP9 specification for more details.
+ */
+struct v4l2_vp9_segmentation {
+ __s16 feature_data[8][4];
+ __u8 feature_enabled[8];
+ __u8 tree_probs[7];
+ __u8 pred_probs[3];
+ __u8 flags;
+ __u8 reserved[5];
+};
+
+#define V4L2_VP9_FRAME_FLAG_KEY_FRAME 0x001
+#define V4L2_VP9_FRAME_FLAG_SHOW_FRAME 0x002
+#define V4L2_VP9_FRAME_FLAG_ERROR_RESILIENT 0x004
+#define V4L2_VP9_FRAME_FLAG_INTRA_ONLY 0x008
+#define V4L2_VP9_FRAME_FLAG_ALLOW_HIGH_PREC_MV 0x010
+#define V4L2_VP9_FRAME_FLAG_REFRESH_FRAME_CTX 0x020
+#define V4L2_VP9_FRAME_FLAG_PARALLEL_DEC_MODE 0x040
+#define V4L2_VP9_FRAME_FLAG_X_SUBSAMPLING 0x080
+#define V4L2_VP9_FRAME_FLAG_Y_SUBSAMPLING 0x100
+#define V4L2_VP9_FRAME_FLAG_COLOR_RANGE_FULL_SWING 0x200
+
+#define V4L2_VP9_SIGN_BIAS_LAST 0x1
+#define V4L2_VP9_SIGN_BIAS_GOLDEN 0x2
+#define V4L2_VP9_SIGN_BIAS_ALT 0x4
+
+#define V4L2_VP9_RESET_FRAME_CTX_NONE 0
+#define V4L2_VP9_RESET_FRAME_CTX_SPEC 1
+#define V4L2_VP9_RESET_FRAME_CTX_ALL 2
+
+#define V4L2_VP9_INTERP_FILTER_EIGHTTAP 0
+#define V4L2_VP9_INTERP_FILTER_EIGHTTAP_SMOOTH 1
+#define V4L2_VP9_INTERP_FILTER_EIGHTTAP_SHARP 2
+#define V4L2_VP9_INTERP_FILTER_BILINEAR 3
+#define V4L2_VP9_INTERP_FILTER_SWITCHABLE 4
+
+#define V4L2_VP9_REFERENCE_MODE_SINGLE_REFERENCE 0
+#define V4L2_VP9_REFERENCE_MODE_COMPOUND_REFERENCE 1
+#define V4L2_VP9_REFERENCE_MODE_SELECT 2
+
+#define V4L2_VP9_PROFILE_MAX 3
+
+#define V4L2_CID_STATELESS_VP9_FRAME (V4L2_CID_CODEC_STATELESS_BASE + 300)
+/**
+ * struct v4l2_ctrl_vp9_frame - VP9 frame decoding control
+ *
+ * @lf: loop filter parameters. See &v4l2_vp9_loop_filter for more details.
+ * @quant: quantization parameters. See &v4l2_vp9_quantization for more details.
+ * @seg: segmentation parameters. See &v4l2_vp9_segmentation for more details.
+ * @flags: combination of V4L2_VP9_FRAME_FLAG_{} flags.
+ * @compressed_header_size: compressed header size in bytes.
+ * @uncompressed_header_size: uncompressed header size in bytes.
+ * @frame_width_minus_1: add 1 to it and you'll get the frame width expressed in pixels.
+ * @frame_height_minus_1: add 1 to it and you'll get the frame height expressed in pixels.
+ * @render_width_minus_1: add 1 to it and you'll get the expected render width expressed in
+ * pixels. This is not used during the decoding process but might be used by HW scalers
+ * to prepare a frame that's ready for scanout.
+ * @render_height_minus_1: add 1 to it and you'll get the expected render height expressed in
+ * pixels. This is not used during the decoding process but might be used by HW scalers
+ * to prepare a frame that's ready for scanout.
+ * @last_frame_ts: "last" reference buffer timestamp.
+ * The timestamp refers to the timestamp field in struct v4l2_buffer.
+ * Use v4l2_timeval_to_ns() to convert the struct timeval to a __u64.
+ * @golden_frame_ts: "golden" reference buffer timestamp.
+ * The timestamp refers to the timestamp field in struct v4l2_buffer.
+ * Use v4l2_timeval_to_ns() to convert the struct timeval to a __u64.
+ * @alt_frame_ts: "alt" reference buffer timestamp.
+ * The timestamp refers to the timestamp field in struct v4l2_buffer.
+ * Use v4l2_timeval_to_ns() to convert the struct timeval to a __u64.
+ * @ref_frame_sign_bias: a bitfield specifying whether the sign bias is set for a given
+ * reference frame. Either of V4L2_VP9_SIGN_BIAS_{}.
+ * @reset_frame_context: specifies whether the frame context should be reset to default values.
+ * Either of V4L2_VP9_RESET_FRAME_CTX_{}.
+ * @frame_context_idx: frame context that should be used/updated.
+ * @profile: VP9 profile. Can be 0, 1, 2 or 3.
+ * @bit_depth: bits per components. Can be 8, 10 or 12. Note that not all profiles support
+ * 10 and/or 12 bits depths.
+ * @interpolation_filter: specifies the filter selection used for performing inter prediction.
+ * Set to one of V4L2_VP9_INTERP_FILTER_{}.
+ * @tile_cols_log2: specifies the base 2 logarithm of the width of each tile (where the width
+ * is measured in units of 8x8 blocks). Shall be less than or equal to 6.
+ * @tile_rows_log2: specifies the base 2 logarithm of the height of each tile (where the height
+ * is measured in units of 8x8 blocks).
+ * @reference_mode: specifies the type of inter prediction to be used.
+ * Set to one of V4L2_VP9_REFERENCE_MODE_{}.
+ * @reserved: padding field. Should be zeroed by applications.
+ */
+struct v4l2_ctrl_vp9_frame {
+ struct v4l2_vp9_loop_filter lf;
+ struct v4l2_vp9_quantization quant;
+ struct v4l2_vp9_segmentation seg;
+ __u32 flags;
+ __u16 compressed_header_size;
+ __u16 uncompressed_header_size;
+ __u16 frame_width_minus_1;
+ __u16 frame_height_minus_1;
+ __u16 render_width_minus_1;
+ __u16 render_height_minus_1;
+ __u64 last_frame_ts;
+ __u64 golden_frame_ts;
+ __u64 alt_frame_ts;
+ __u8 ref_frame_sign_bias;
+ __u8 reset_frame_context;
+ __u8 frame_context_idx;
+ __u8 profile;
+ __u8 bit_depth;
+ __u8 interpolation_filter;
+ __u8 tile_cols_log2;
+ __u8 tile_rows_log2;
+ __u8 reference_mode;
+ __u8 reserved[7];
+};
+
+#define V4L2_VP9_NUM_FRAME_CTX 4
+
+/**
+ * struct v4l2_vp9_mv_probs - VP9 Motion vector probability updates
+ * @joint: motion vector joint probability updates.
+ * @sign: motion vector sign probability updates.
+ * @classes: motion vector class probability updates.
+ * @class0_bit: motion vector class0 bit probability updates.
+ * @bits: motion vector bits probability updates.
+ * @class0_fr: motion vector class0 fractional bit probability updates.
+ * @fr: motion vector fractional bit probability updates.
+ * @class0_hp: motion vector class0 high precision fractional bit probability updates.
+ * @hp: motion vector high precision fractional bit probability updates.
+ *
+ * This structure contains new values of motion vector probabilities.
+ * A value of zero in an array element means there is no update of the relevant probability.
+ * See `struct v4l2_vp9_prob_updates` for details.
+ */
+struct v4l2_vp9_mv_probs {
+ __u8 joint[3];
+ __u8 sign[2];
+ __u8 classes[2][10];
+ __u8 class0_bit[2];
+ __u8 bits[2][10];
+ __u8 class0_fr[2][2][3];
+ __u8 fr[2][3];
+ __u8 class0_hp[2];
+ __u8 hp[2];
+};
+
+#define V4L2_CID_STATELESS_VP9_COMPRESSED_HDR (V4L2_CID_CODEC_STATELESS_BASE + 301)
+
+#define V4L2_VP9_TX_MODE_ONLY_4X4 0
+#define V4L2_VP9_TX_MODE_ALLOW_8X8 1
+#define V4L2_VP9_TX_MODE_ALLOW_16X16 2
+#define V4L2_VP9_TX_MODE_ALLOW_32X32 3
+#define V4L2_VP9_TX_MODE_SELECT 4
+
+/**
+ * struct v4l2_ctrl_vp9_compressed_hdr - VP9 probability updates control
+ * @tx_mode: specifies the TX mode. Set to one of V4L2_VP9_TX_MODE_{}.
+ * @tx8: TX 8x8 probability updates.
+ * @tx16: TX 16x16 probability updates.
+ * @tx32: TX 32x32 probability updates.
+ * @coef: coefficient probability updates.
+ * @skip: skip probability updates.
+ * @inter_mode: inter mode probability updates.
+ * @interp_filter: interpolation filter probability updates.
+ * @is_inter: is inter-block probability updates.
+ * @comp_mode: compound prediction mode probability updates.
+ * @single_ref: single ref probability updates.
+ * @comp_ref: compound ref probability updates.
+ * @y_mode: Y prediction mode probability updates.
+ * @uv_mode: UV prediction mode probability updates.
+ * @partition: partition probability updates.
+ * @mv: motion vector probability updates.
+ *
+ * This structure holds the probabilities update as parsed in the compressed
+ * header (Spec 6.3). These values represent the value of probability update after
+ * being translated with inv_map_table[] (see 6.3.5). A value of zero in an array element
+ * means that there is no update of the relevant probability.
+ *
+ * This control is optional and needs to be used when dealing with the hardware which is
+ * not capable of parsing the compressed header itself. Only drivers which need it will
+ * implement it.
+ */
+struct v4l2_ctrl_vp9_compressed_hdr {
+ __u8 tx_mode;
+ __u8 tx8[2][1];
+ __u8 tx16[2][2];
+ __u8 tx32[2][3];
+ __u8 coef[4][2][2][6][6][3];
+ __u8 skip[3];
+ __u8 inter_mode[7][3];
+ __u8 interp_filter[4][2];
+ __u8 is_inter[4];
+ __u8 comp_mode[5];
+ __u8 single_ref[5][2];
+ __u8 comp_ref[5];
+ __u8 y_mode[4][9];
+ __u8 uv_mode[10][9];
+ __u8 partition[16][3];
+
+ struct v4l2_vp9_mv_probs mv;
+};
+
+/* Stateless AV1 controls */
+
+#define V4L2_AV1_TOTAL_REFS_PER_FRAME 8
+#define V4L2_AV1_CDEF_MAX 8
+#define V4L2_AV1_NUM_PLANES_MAX 3 /* 1 if monochrome, 3 otherwise */
+#define V4L2_AV1_MAX_SEGMENTS 8
+#define V4L2_AV1_MAX_OPERATING_POINTS (1 << 5) /* 5 bits to encode */
+#define V4L2_AV1_REFS_PER_FRAME 7
+#define V4L2_AV1_MAX_NUM_Y_POINTS (1 << 4) /* 4 bits to encode */
+#define V4L2_AV1_MAX_NUM_CB_POINTS (1 << 4) /* 4 bits to encode */
+#define V4L2_AV1_MAX_NUM_CR_POINTS (1 << 4) /* 4 bits to encode */
+#define V4L2_AV1_AR_COEFFS_SIZE 25 /* (2 * 3 * (3 + 1)) + 1 */
+#define V4L2_AV1_MAX_NUM_PLANES 3
+#define V4L2_AV1_MAX_TILE_COLS 64
+#define V4L2_AV1_MAX_TILE_ROWS 64
+#define V4L2_AV1_MAX_TILE_COUNT 512
+
+#define V4L2_AV1_SEQUENCE_FLAG_STILL_PICTURE 0x00000001
+#define V4L2_AV1_SEQUENCE_FLAG_USE_128X128_SUPERBLOCK 0x00000002
+#define V4L2_AV1_SEQUENCE_FLAG_ENABLE_FILTER_INTRA 0x00000004
+#define V4L2_AV1_SEQUENCE_FLAG_ENABLE_INTRA_EDGE_FILTER 0x00000008
+#define V4L2_AV1_SEQUENCE_FLAG_ENABLE_INTERINTRA_COMPOUND 0x00000010
+#define V4L2_AV1_SEQUENCE_FLAG_ENABLE_MASKED_COMPOUND 0x00000020
+#define V4L2_AV1_SEQUENCE_FLAG_ENABLE_WARPED_MOTION 0x00000040
+#define V4L2_AV1_SEQUENCE_FLAG_ENABLE_DUAL_FILTER 0x00000080
+#define V4L2_AV1_SEQUENCE_FLAG_ENABLE_ORDER_HINT 0x00000100
+#define V4L2_AV1_SEQUENCE_FLAG_ENABLE_JNT_COMP 0x00000200
+#define V4L2_AV1_SEQUENCE_FLAG_ENABLE_REF_FRAME_MVS 0x00000400
+#define V4L2_AV1_SEQUENCE_FLAG_ENABLE_SUPERRES 0x00000800
+#define V4L2_AV1_SEQUENCE_FLAG_ENABLE_CDEF 0x00001000
+#define V4L2_AV1_SEQUENCE_FLAG_ENABLE_RESTORATION 0x00002000
+#define V4L2_AV1_SEQUENCE_FLAG_MONO_CHROME 0x00004000
+#define V4L2_AV1_SEQUENCE_FLAG_COLOR_RANGE 0x00008000
+#define V4L2_AV1_SEQUENCE_FLAG_SUBSAMPLING_X 0x00010000
+#define V4L2_AV1_SEQUENCE_FLAG_SUBSAMPLING_Y 0x00020000
+#define V4L2_AV1_SEQUENCE_FLAG_FILM_GRAIN_PARAMS_PRESENT 0x00040000
+#define V4L2_AV1_SEQUENCE_FLAG_SEPARATE_UV_DELTA_Q 0x00080000
+
+#define V4L2_CID_STATELESS_AV1_SEQUENCE (V4L2_CID_CODEC_STATELESS_BASE + 500)
+/**
+ * struct v4l2_ctrl_av1_sequence - AV1 Sequence
+ *
+ * Represents an AV1 Sequence OBU. See section 5.5 "Sequence header OBU syntax"
+ * for more details.
+ *
+ * @flags: See V4L2_AV1_SEQUENCE_FLAG_{}.
+ * @seq_profile: specifies the features that can be used in the coded video
+ * sequence.
+ * @order_hint_bits: specifies the number of bits used for the order_hint field
+ * at each frame.
+ * @bit_depth: the bitdepth to use for the sequence as described in section
+ * 5.5.2 "Color config syntax".
+ * @reserved: padding field. Should be zeroed by applications.
+ * @max_frame_width_minus_1: specifies the maximum frame width minus 1 for the
+ * frames represented by this sequence header.
+ * @max_frame_height_minus_1: specifies the maximum frame height minus 1 for the
+ * frames represented by this sequence header.
+ */
+struct v4l2_ctrl_av1_sequence {
+ __u32 flags;
+ __u8 seq_profile;
+ __u8 order_hint_bits;
+ __u8 bit_depth;
+ __u8 reserved;
+ __u16 max_frame_width_minus_1;
+ __u16 max_frame_height_minus_1;
+};
+
+#define V4L2_CID_STATELESS_AV1_TILE_GROUP_ENTRY (V4L2_CID_CODEC_STATELESS_BASE + 501)
+/**
+ * struct v4l2_ctrl_av1_tile_group_entry - AV1 Tile Group entry
+ *
+ * Represents a single AV1 tile inside an AV1 Tile Group. Note that MiRowStart,
+ * MiRowEnd, MiColStart and MiColEnd can be retrieved from struct
+ * v4l2_av1_tile_info in struct v4l2_ctrl_av1_frame using tile_row and
+ * tile_col. See section 6.10.1 "General tile group OBU semantics" for more
+ * details.
+ *
+ * @tile_offset: offset from the OBU data, i.e. where the coded tile data
+ * actually starts.
+ * @tile_size: specifies the size in bytes of the coded tile. Equivalent to
+ * "TileSize" in the AV1 Specification.
+ * @tile_row: specifies the row of the current tile. Equivalent to "TileRow" in
+ * the AV1 Specification.
+ * @tile_col: specifies the col of the current tile. Equivalent to "TileCol" in
+ * the AV1 Specification.
+ */
+struct v4l2_ctrl_av1_tile_group_entry {
+ __u32 tile_offset;
+ __u32 tile_size;
+ __u32 tile_row;
+ __u32 tile_col;
+};
+
+/**
+ * enum v4l2_av1_warp_model - AV1 Warp Model as described in section 3
+ * "Symbols and abbreviated terms" of the AV1 Specification.
+ *
+ * @V4L2_AV1_WARP_MODEL_IDENTITY: Warp model is just an identity transform.
+ * @V4L2_AV1_WARP_MODEL_TRANSLATION: Warp model is a pure translation.
+ * @V4L2_AV1_WARP_MODEL_ROTZOOM: Warp model is a rotation + symmetric zoom +
+ * translation.
+ * @V4L2_AV1_WARP_MODEL_AFFINE: Warp model is a general affine transform.
+ */
+enum v4l2_av1_warp_model {
+ V4L2_AV1_WARP_MODEL_IDENTITY = 0,
+ V4L2_AV1_WARP_MODEL_TRANSLATION = 1,
+ V4L2_AV1_WARP_MODEL_ROTZOOM = 2,
+ V4L2_AV1_WARP_MODEL_AFFINE = 3,
+};
+
+/**
+ * enum v4l2_av1_reference_frame - AV1 reference frames
+ *
+ * @V4L2_AV1_REF_INTRA_FRAME: Intra Frame Reference
+ * @V4L2_AV1_REF_LAST_FRAME: Last Reference Frame
+ * @V4L2_AV1_REF_LAST2_FRAME: Last2 Reference Frame
+ * @V4L2_AV1_REF_LAST3_FRAME: Last3 Reference Frame
+ * @V4L2_AV1_REF_GOLDEN_FRAME: Golden Reference Frame
+ * @V4L2_AV1_REF_BWDREF_FRAME: BWD Reference Frame
+ * @V4L2_AV1_REF_ALTREF2_FRAME: Alternative2 Reference Frame
+ * @V4L2_AV1_REF_ALTREF_FRAME: Alternative Reference Frame
+ */
+enum v4l2_av1_reference_frame {
+ V4L2_AV1_REF_INTRA_FRAME = 0,
+ V4L2_AV1_REF_LAST_FRAME = 1,
+ V4L2_AV1_REF_LAST2_FRAME = 2,
+ V4L2_AV1_REF_LAST3_FRAME = 3,
+ V4L2_AV1_REF_GOLDEN_FRAME = 4,
+ V4L2_AV1_REF_BWDREF_FRAME = 5,
+ V4L2_AV1_REF_ALTREF2_FRAME = 6,
+ V4L2_AV1_REF_ALTREF_FRAME = 7,
+};
+
+#define V4L2_AV1_GLOBAL_MOTION_IS_INVALID(ref) (1 << (ref))
+
+#define V4L2_AV1_GLOBAL_MOTION_FLAG_IS_GLOBAL 0x1
+#define V4L2_AV1_GLOBAL_MOTION_FLAG_IS_ROT_ZOOM 0x2
+#define V4L2_AV1_GLOBAL_MOTION_FLAG_IS_TRANSLATION 0x4
+/**
+ * struct v4l2_av1_global_motion - AV1 Global Motion parameters as described in
+ * section 6.8.17 "Global motion params semantics" of the AV1 specification.
+ *
+ * @flags: A bitfield containing the flags per reference frame. See
+ * V4L2_AV1_GLOBAL_MOTION_FLAG_{}
+ * @type: The type of global motion transform used.
+ * @params: this field has the same meaning as "gm_params" in the AV1
+ * specification.
+ * @invalid: bitfield indicating whether the global motion params are invalid
+ * for a given reference frame. See section 7.11.3.6 Setup shear process and
+ * the variable "warpValid". Use V4L2_AV1_GLOBAL_MOTION_IS_INVALID(ref) to
+ * create a suitable mask.
+ * @reserved: padding field. Should be zeroed by applications.
+ */
+
+struct v4l2_av1_global_motion {
+ __u8 flags[V4L2_AV1_TOTAL_REFS_PER_FRAME];
+ enum v4l2_av1_warp_model type[V4L2_AV1_TOTAL_REFS_PER_FRAME];
+ __s32 params[V4L2_AV1_TOTAL_REFS_PER_FRAME][6];
+ __u8 invalid;
+ __u8 reserved[3];
+};
+
+/**
+ * enum v4l2_av1_frame_restoration_type - AV1 Frame Restoration Type
+ * @V4L2_AV1_FRAME_RESTORE_NONE: no filtering is applied.
+ * @V4L2_AV1_FRAME_RESTORE_WIENER: Wiener filter process is invoked.
+ * @V4L2_AV1_FRAME_RESTORE_SGRPROJ: self guided filter process is invoked.
+ * @V4L2_AV1_FRAME_RESTORE_SWITCHABLE: restoration filter is swichtable.
+ */
+enum v4l2_av1_frame_restoration_type {
+ V4L2_AV1_FRAME_RESTORE_NONE = 0,
+ V4L2_AV1_FRAME_RESTORE_WIENER = 1,
+ V4L2_AV1_FRAME_RESTORE_SGRPROJ = 2,
+ V4L2_AV1_FRAME_RESTORE_SWITCHABLE = 3,
+};
+
+#define V4L2_AV1_LOOP_RESTORATION_FLAG_USES_LR 0x1
+#define V4L2_AV1_LOOP_RESTORATION_FLAG_USES_CHROMA_LR 0x2
+
+/**
+ * struct v4l2_av1_loop_restoration - AV1 Loop Restauration as described in
+ * section 6.10.15 "Loop restoration params semantics" of the AV1 specification.
+ *
+ * @flags: See V4L2_AV1_LOOP_RESTORATION_FLAG_{}.
+ * @lr_unit_shift: specifies if the luma restoration size should be halved.
+ * @lr_uv_shift: specifies if the chroma size should be half the luma size.
+ * @reserved: padding field. Should be zeroed by applications.
+ * @frame_restoration_type: specifies the type of restoration used for each
+ * plane. See enum v4l2_av1_frame_restoration_type.
+ * @loop_restoration_size: specifies the size of loop restoration units in units
+ * of samples in the current plane.
+ */
+struct v4l2_av1_loop_restoration {
+ __u8 flags;
+ __u8 lr_unit_shift;
+ __u8 lr_uv_shift;
+ __u8 reserved;
+ enum v4l2_av1_frame_restoration_type frame_restoration_type[V4L2_AV1_NUM_PLANES_MAX];
+ __u32 loop_restoration_size[V4L2_AV1_MAX_NUM_PLANES];
+};
+
+/**
+ * struct v4l2_av1_cdef - AV1 CDEF params semantics as described in section
+ * 6.10.14 "CDEF params semantics" of the AV1 specification
+ *
+ * @damping_minus_3: controls the amount of damping in the deringing filter.
+ * @bits: specifies the number of bits needed to specify which CDEF filter to
+ * apply.
+ * @y_pri_strength: specifies the strength of the primary filter.
+ * @y_sec_strength: specifies the strength of the secondary filter.
+ * @uv_pri_strength: specifies the strength of the primary filter.
+ * @uv_sec_strength: specifies the strength of the secondary filter.
+ */
+struct v4l2_av1_cdef {
+ __u8 damping_minus_3;
+ __u8 bits;
+ __u8 y_pri_strength[V4L2_AV1_CDEF_MAX];
+ __u8 y_sec_strength[V4L2_AV1_CDEF_MAX];
+ __u8 uv_pri_strength[V4L2_AV1_CDEF_MAX];
+ __u8 uv_sec_strength[V4L2_AV1_CDEF_MAX];
+};
+
+#define V4L2_AV1_SEGMENTATION_FLAG_ENABLED 0x1
+#define V4L2_AV1_SEGMENTATION_FLAG_UPDATE_MAP 0x2
+#define V4L2_AV1_SEGMENTATION_FLAG_TEMPORAL_UPDATE 0x4
+#define V4L2_AV1_SEGMENTATION_FLAG_UPDATE_DATA 0x8
+#define V4L2_AV1_SEGMENTATION_FLAG_SEG_ID_PRE_SKIP 0x10
+
+/**
+ * enum v4l2_av1_segment_feature - AV1 segment features as described in section
+ * 3 "Symbols and abbreviated terms" of the AV1 specification.
+ *
+ * @V4L2_AV1_SEG_LVL_ALT_Q: Index for quantizer segment feature.
+ * @V4L2_AV1_SEG_LVL_ALT_LF_Y_V: Index for vertical luma loop filter segment
+ * feature.
+ * @V4L2_AV1_SEG_LVL_REF_FRAME: Index for reference frame segment feature.
+ * @V4L2_AV1_SEG_LVL_REF_SKIP: Index for skip segment feature.
+ * @V4L2_AV1_SEG_LVL_REF_GLOBALMV: Index for global mv feature.
+ * @V4L2_AV1_SEG_LVL_MAX: Number of segment features.
+ */
+enum v4l2_av1_segment_feature {
+ V4L2_AV1_SEG_LVL_ALT_Q = 0,
+ V4L2_AV1_SEG_LVL_ALT_LF_Y_V = 1,
+ V4L2_AV1_SEG_LVL_REF_FRAME = 5,
+ V4L2_AV1_SEG_LVL_REF_SKIP = 6,
+ V4L2_AV1_SEG_LVL_REF_GLOBALMV = 7,
+ V4L2_AV1_SEG_LVL_MAX = 8
+};
+
+#define V4L2_AV1_SEGMENT_FEATURE_ENABLED(id) (1 << (id))
+
+/**
+ * struct v4l2_av1_segmentation - AV1 Segmentation params as defined in section
+ * 6.8.13 "Segmentation params semantics" of the AV1 specification.
+ *
+ * @flags: see V4L2_AV1_SEGMENTATION_FLAG_{}.
+ * @last_active_seg_id: indicates the highest numbered segment id that has some
+ * enabled feature. This is used when decoding the segment id to only decode
+ * choices corresponding to used segments.
+ * @feature_enabled: bitmask defining which features are enabled in each
+ * segment. Use V4L2_AV1_SEGMENT_FEATURE_ENABLED to build a suitable mask.
+ * @feature_data: data attached to each feature. Data entry is only valid if the
+ * feature is enabled
+ */
+struct v4l2_av1_segmentation {
+ __u8 flags;
+ __u8 last_active_seg_id;
+ __u8 feature_enabled[V4L2_AV1_MAX_SEGMENTS];
+ __s16 feature_data[V4L2_AV1_MAX_SEGMENTS][V4L2_AV1_SEG_LVL_MAX];
+};
+
+#define V4L2_AV1_LOOP_FILTER_FLAG_DELTA_ENABLED 0x1
+#define V4L2_AV1_LOOP_FILTER_FLAG_DELTA_UPDATE 0x2
+#define V4L2_AV1_LOOP_FILTER_FLAG_DELTA_LF_PRESENT 0x4
+#define V4L2_AV1_LOOP_FILTER_FLAG_DELTA_LF_MULTI 0x8
+
+/**
+ * struct v4l2_av1_loop_filter - AV1 Loop filter params as defined in section
+ * 6.8.10 "Loop filter semantics" and 6.8.16 "Loop filter delta parameters
+ * semantics" of the AV1 specification.
+ *
+ * @flags: see V4L2_AV1_LOOP_FILTER_FLAG_{}
+ * @level: an array containing loop filter strength values. Different loop
+ * filter strength values from the array are used depending on the image plane
+ * being filtered, and the edge direction (vertical or horizontal) being
+ * filtered.
+ * @sharpness: indicates the sharpness level. The loop_filter_level and
+ * loop_filter_sharpness together determine when a block edge is filtered, and
+ * by how much the filtering can change the sample values. The loop filter
+ * process is described in section 7.14 of the AV1 specification.
+ * @ref_deltas: contains the adjustment needed for the filter level based on the
+ * chosen reference frame. If this syntax element is not present, it maintains
+ * its previous value.
+ * @mode_deltas: contains the adjustment needed for the filter level based on
+ * the chosen mode. If this syntax element is not present, it maintains its
+ * previous value.
+ * @delta_lf_res: specifies the left shift which should be applied to decoded
+ * loop filter delta values.
+ */
+struct v4l2_av1_loop_filter {
+ __u8 flags;
+ __u8 level[4];
+ __u8 sharpness;
+ __s8 ref_deltas[V4L2_AV1_TOTAL_REFS_PER_FRAME];
+ __s8 mode_deltas[2];
+ __u8 delta_lf_res;
+};
+
+#define V4L2_AV1_QUANTIZATION_FLAG_DIFF_UV_DELTA 0x1
+#define V4L2_AV1_QUANTIZATION_FLAG_USING_QMATRIX 0x2
+#define V4L2_AV1_QUANTIZATION_FLAG_DELTA_Q_PRESENT 0x4
+
+/**
+ * struct v4l2_av1_quantization - AV1 Quantization params as defined in section
+ * 6.8.11 "Quantization params semantics" of the AV1 specification.
+ *
+ * @flags: see V4L2_AV1_QUANTIZATION_FLAG_{}
+ * @base_q_idx: indicates the base frame qindex. This is used for Y AC
+ * coefficients and as the base value for the other quantizers.
+ * @delta_q_y_dc: indicates the Y DC quantizer relative to base_q_idx.
+ * @delta_q_u_dc: indicates the U DC quantizer relative to base_q_idx.
+ * @delta_q_u_ac: indicates the U AC quantizer relative to base_q_idx.
+ * @delta_q_v_dc: indicates the V DC quantizer relative to base_q_idx.
+ * @delta_q_v_ac: indicates the V AC quantizer relative to base_q_idx.
+ * @qm_y: specifies the level in the quantizer matrix that should be used for
+ * luma plane decoding.
+ * @qm_u: specifies the level in the quantizer matrix that should be used for
+ * chroma U plane decoding.
+ * @qm_v: specifies the level in the quantizer matrix that should be used for
+ * chroma V plane decoding.
+ * @delta_q_res: specifies the left shift which should be applied to decoded
+ * quantizer index delta values.
+ */
+struct v4l2_av1_quantization {
+ __u8 flags;
+ __u8 base_q_idx;
+ __s8 delta_q_y_dc;
+ __s8 delta_q_u_dc;
+ __s8 delta_q_u_ac;
+ __s8 delta_q_v_dc;
+ __s8 delta_q_v_ac;
+ __u8 qm_y;
+ __u8 qm_u;
+ __u8 qm_v;
+ __u8 delta_q_res;
+};
+
+#define V4L2_AV1_TILE_INFO_FLAG_UNIFORM_TILE_SPACING 0x1
+
+/**
+ * struct v4l2_av1_tile_info - AV1 Tile info as defined in section 6.8.14 "Tile
+ * info semantics" of the AV1 specification.
+ *
+ * @flags: see V4L2_AV1_TILE_INFO_FLAG_{}
+ * @context_update_tile_id: specifies which tile to use for the CDF update.
+ * @tile_rows: specifies the number of tiles down the frame.
+ * @tile_cols: specifies the number of tiles across the frame.
+ * @mi_col_starts: an array specifying the start column (in units of 4x4 luma
+ * samples) for each tile across the image.
+ * @mi_row_starts: an array specifying the start row (in units of 4x4 luma
+ * samples) for each tile down the image.
+ * @width_in_sbs_minus_1: specifies the width of a tile minus 1 in units of
+ * superblocks.
+ * @height_in_sbs_minus_1: specifies the height of a tile minus 1 in units of
+ * superblocks.
+ * @tile_size_bytes: specifies the number of bytes needed to code each tile
+ * size.
+ * @reserved: padding field. Should be zeroed by applications.
+ */
+struct v4l2_av1_tile_info {
+ __u8 flags;
+ __u8 context_update_tile_id;
+ __u8 tile_cols;
+ __u8 tile_rows;
+ __u32 mi_col_starts[V4L2_AV1_MAX_TILE_COLS + 1];
+ __u32 mi_row_starts[V4L2_AV1_MAX_TILE_ROWS + 1];
+ __u32 width_in_sbs_minus_1[V4L2_AV1_MAX_TILE_COLS];
+ __u32 height_in_sbs_minus_1[V4L2_AV1_MAX_TILE_ROWS];
+ __u8 tile_size_bytes;
+ __u8 reserved[3];
+};
+
+/**
+ * enum v4l2_av1_frame_type - AV1 Frame Type
+ *
+ * @V4L2_AV1_KEY_FRAME: Key frame
+ * @V4L2_AV1_INTER_FRAME: Inter frame
+ * @V4L2_AV1_INTRA_ONLY_FRAME: Intra-only frame
+ * @V4L2_AV1_SWITCH_FRAME: Switch frame
+ */
+enum v4l2_av1_frame_type {
+ V4L2_AV1_KEY_FRAME = 0,
+ V4L2_AV1_INTER_FRAME = 1,
+ V4L2_AV1_INTRA_ONLY_FRAME = 2,
+ V4L2_AV1_SWITCH_FRAME = 3
+};
+
+/**
+ * enum v4l2_av1_interpolation_filter - AV1 interpolation filter types
+ *
+ * @V4L2_AV1_INTERPOLATION_FILTER_EIGHTTAP: eight tap filter
+ * @V4L2_AV1_INTERPOLATION_FILTER_EIGHTTAP_SMOOTH: eight tap smooth filter
+ * @V4L2_AV1_INTERPOLATION_FILTER_EIGHTTAP_SHARP: eight tap sharp filter
+ * @V4L2_AV1_INTERPOLATION_FILTER_BILINEAR: bilinear filter
+ * @V4L2_AV1_INTERPOLATION_FILTER_SWITCHABLE: filter selection is signaled at
+ * the block level
+ *
+ * See section 6.8.9 "Interpolation filter semantics" of the AV1 specification
+ * for more details.
+ */
+enum v4l2_av1_interpolation_filter {
+ V4L2_AV1_INTERPOLATION_FILTER_EIGHTTAP = 0,
+ V4L2_AV1_INTERPOLATION_FILTER_EIGHTTAP_SMOOTH = 1,
+ V4L2_AV1_INTERPOLATION_FILTER_EIGHTTAP_SHARP = 2,
+ V4L2_AV1_INTERPOLATION_FILTER_BILINEAR = 3,
+ V4L2_AV1_INTERPOLATION_FILTER_SWITCHABLE = 4,
+};
+
+/**
+ * enum v4l2_av1_tx_mode - AV1 Tx mode as described in section 6.8.21 "TX mode
+ * semantics" of the AV1 specification.
+ * @V4L2_AV1_TX_MODE_ONLY_4X4: the inverse transform will use only 4x4
+ * transforms
+ * @V4L2_AV1_TX_MODE_LARGEST: the inverse transform will use the largest
+ * transform size that fits inside the block
+ * @V4L2_AV1_TX_MODE_SELECT: the choice of transform size is specified
+ * explicitly for each block.
+ */
+enum v4l2_av1_tx_mode {
+ V4L2_AV1_TX_MODE_ONLY_4X4 = 0,
+ V4L2_AV1_TX_MODE_LARGEST = 1,
+ V4L2_AV1_TX_MODE_SELECT = 2
+};
+
+#define V4L2_AV1_FRAME_FLAG_SHOW_FRAME 0x00000001
+#define V4L2_AV1_FRAME_FLAG_SHOWABLE_FRAME 0x00000002
+#define V4L2_AV1_FRAME_FLAG_ERROR_RESILIENT_MODE 0x00000004
+#define V4L2_AV1_FRAME_FLAG_DISABLE_CDF_UPDATE 0x00000008
+#define V4L2_AV1_FRAME_FLAG_ALLOW_SCREEN_CONTENT_TOOLS 0x00000010
+#define V4L2_AV1_FRAME_FLAG_FORCE_INTEGER_MV 0x00000020
+#define V4L2_AV1_FRAME_FLAG_ALLOW_INTRABC 0x00000040
+#define V4L2_AV1_FRAME_FLAG_USE_SUPERRES 0x00000080
+#define V4L2_AV1_FRAME_FLAG_ALLOW_HIGH_PRECISION_MV 0x00000100
+#define V4L2_AV1_FRAME_FLAG_IS_MOTION_MODE_SWITCHABLE 0x00000200
+#define V4L2_AV1_FRAME_FLAG_USE_REF_FRAME_MVS 0x00000400
+#define V4L2_AV1_FRAME_FLAG_DISABLE_FRAME_END_UPDATE_CDF 0x00000800
+#define V4L2_AV1_FRAME_FLAG_ALLOW_WARPED_MOTION 0x00001000
+#define V4L2_AV1_FRAME_FLAG_REFERENCE_SELECT 0x00002000
+#define V4L2_AV1_FRAME_FLAG_REDUCED_TX_SET 0x00004000
+#define V4L2_AV1_FRAME_FLAG_SKIP_MODE_ALLOWED 0x00008000
+#define V4L2_AV1_FRAME_FLAG_SKIP_MODE_PRESENT 0x00010000
+#define V4L2_AV1_FRAME_FLAG_FRAME_SIZE_OVERRIDE 0x00020000
+#define V4L2_AV1_FRAME_FLAG_BUFFER_REMOVAL_TIME_PRESENT 0x00040000
+#define V4L2_AV1_FRAME_FLAG_FRAME_REFS_SHORT_SIGNALING 0x00080000
+
+#define V4L2_CID_STATELESS_AV1_FRAME (V4L2_CID_CODEC_STATELESS_BASE + 502)
+/**
+ * struct v4l2_ctrl_av1_frame - Represents an AV1 Frame Header OBU.
+ *
+ * @tile_info: tile info
+ * @quantization: quantization params
+ * @segmentation: segmentation params
+ * @superres_denom: the denominator for the upscaling ratio.
+ * @loop_filter: loop filter params
+ * @cdef: cdef params
+ * @skip_mode_frame: specifies the frames to use for compound prediction when
+ * skip_mode is equal to 1.
+ * @primary_ref_frame: specifies which reference frame contains the CDF values
+ * and other state that should be loaded at the start of the frame.
+ * @loop_restoration: loop restoration params
+ * @global_motion: global motion params
+ * @flags: see V4L2_AV1_FRAME_FLAG_{}
+ * @frame_type: specifies the AV1 frame type
+ * @order_hint: specifies OrderHintBits least significant bits of the expected
+ * output order for this frame.
+ * @upscaled_width: the upscaled width.
+ * @interpolation_filter: specifies the filter selection used for performing
+ * inter prediction.
+ * @tx_mode: specifies how the transform size is determined.
+ * @frame_width_minus_1: add 1 to get the frame's width.
+ * @frame_height_minus_1: add 1 to get the frame's height
+ * @render_width_minus_1: add 1 to get the render width of the frame in luma
+ * samples.
+ * @render_height_minus_1: add 1 to get the render height of the frame in luma
+ * samples.
+ * @current_frame_id: specifies the frame id number for the current frame. Frame
+ * id numbers are additional information that do not affect the decoding
+ * process, but provide decoders with a way of detecting missing reference
+ * frames so that appropriate action can be taken.
+ * @buffer_removal_time: specifies the frame removal time in units of DecCT clock
+ * ticks counted from the removal time of the last random access point for
+ * operating point opNum.
+ * @reserved: padding field. Should be zeroed by applications.
+ * @order_hints: specifies the expected output order hint for each reference
+ * frame. This field corresponds to the OrderHints variable from the
+ * specification (section 5.9.2 "Uncompressed header syntax"). As such, this is
+ * only used for non-intra frames and ignored otherwise. order_hints[0] is
+ * always ignored.
+ * @reference_frame_ts: the V4L2 timestamp of the reference frame slots.
+ * @ref_frame_idx: used to index into @reference_frame_ts when decoding
+ * inter-frames. The meaning of this array is the same as in the specification.
+ * The timestamp refers to the timestamp field in struct v4l2_buffer. Use
+ * v4l2_timeval_to_ns() to convert the struct timeval to a __u64.
+ * @refresh_frame_flags: contains a bitmask that specifies which reference frame
+ * slots will be updated with the current frame after it is decoded.
+ */
+struct v4l2_ctrl_av1_frame {
+ struct v4l2_av1_tile_info tile_info;
+ struct v4l2_av1_quantization quantization;
+ __u8 superres_denom;
+ struct v4l2_av1_segmentation segmentation;
+ struct v4l2_av1_loop_filter loop_filter;
+ struct v4l2_av1_cdef cdef;
+ __u8 skip_mode_frame[2];
+ __u8 primary_ref_frame;
+ struct v4l2_av1_loop_restoration loop_restoration;
+ struct v4l2_av1_global_motion global_motion;
+ __u32 flags;
+ enum v4l2_av1_frame_type frame_type;
+ __u32 order_hint;
+ __u32 upscaled_width;
+ enum v4l2_av1_interpolation_filter interpolation_filter;
+ enum v4l2_av1_tx_mode tx_mode;
+ __u32 frame_width_minus_1;
+ __u32 frame_height_minus_1;
+ __u16 render_width_minus_1;
+ __u16 render_height_minus_1;
+
+ __u32 current_frame_id;
+ __u32 buffer_removal_time[V4L2_AV1_MAX_OPERATING_POINTS];
+ __u8 reserved[4];
+ __u32 order_hints[V4L2_AV1_TOTAL_REFS_PER_FRAME];
+ __u64 reference_frame_ts[V4L2_AV1_TOTAL_REFS_PER_FRAME];
+ __s8 ref_frame_idx[V4L2_AV1_REFS_PER_FRAME];
+ __u8 refresh_frame_flags;
+};
+
+#define V4L2_AV1_FILM_GRAIN_FLAG_APPLY_GRAIN 0x1
+#define V4L2_AV1_FILM_GRAIN_FLAG_UPDATE_GRAIN 0x2
+#define V4L2_AV1_FILM_GRAIN_FLAG_CHROMA_SCALING_FROM_LUMA 0x4
+#define V4L2_AV1_FILM_GRAIN_FLAG_OVERLAP 0x8
+#define V4L2_AV1_FILM_GRAIN_FLAG_CLIP_TO_RESTRICTED_RANGE 0x10
+
+#define V4L2_CID_STATELESS_AV1_FILM_GRAIN (V4L2_CID_CODEC_STATELESS_BASE + 505)
+/**
+ * struct v4l2_ctrl_av1_film_grain - AV1 Film Grain parameters.
+ *
+ * Film grain parameters as specified by section 6.8.20 of the AV1 Specification.
+ *
+ * @flags: see V4L2_AV1_FILM_GRAIN_{}.
+ * @cr_mult: represents a multiplier for the cr component used in derivation of
+ * the input index to the cr component scaling function.
+ * @grain_seed: specifies the starting value for the pseudo-random numbers used
+ * during film grain synthesis.
+ * @film_grain_params_ref_idx: indicates which reference frame contains the
+ * film grain parameters to be used for this frame.
+ * @num_y_points: specifies the number of points for the piece-wise linear
+ * scaling function of the luma component.
+ * @point_y_value: represents the x (luma value) coordinate for the i-th point
+ * of the piecewise linear scaling function for luma component. The values are
+ * signaled on the scale of 0..255. In case of 10 bit video, these values
+ * correspond to luma values divided by 4. In case of 12 bit video, these values
+ * correspond to luma values divided by 16.
+ * @point_y_scaling: represents the scaling (output) value for the i-th point
+ * of the piecewise linear scaling function for luma component.
+ * @num_cb_points: specifies the number of points for the piece-wise linear
+ * scaling function of the cb component.
+ * @point_cb_value: represents the x coordinate for the i-th point of the
+ * piece-wise linear scaling function for cb component. The values are signaled
+ * on the scale of 0..255.
+ * @point_cb_scaling: represents the scaling (output) value for the i-th point
+ * of the piecewise linear scaling function for cb component.
+ * @num_cr_points: specifies represents the number of points for the piece-wise
+ * linear scaling function of the cr component.
+ * @point_cr_value: represents the x coordinate for the i-th point of the
+ * piece-wise linear scaling function for cr component. The values are signaled
+ * on the scale of 0..255.
+ * @point_cr_scaling: represents the scaling (output) value for the i-th point
+ * of the piecewise linear scaling function for cr component.
+ * @grain_scaling_minus_8: represents the shift – 8 applied to the values of the
+ * chroma component. The grain_scaling_minus_8 can take values of 0..3 and
+ * determines the range and quantization step of the standard deviation of film
+ * grain.
+ * @ar_coeff_lag: specifies the number of auto-regressive coefficients for luma
+ * and chroma.
+ * @ar_coeffs_y_plus_128: specifies auto-regressive coefficients used for the Y
+ * plane.
+ * @ar_coeffs_cb_plus_128: specifies auto-regressive coefficients used for the U
+ * plane.
+ * @ar_coeffs_cr_plus_128: specifies auto-regressive coefficients used for the V
+ * plane.
+ * @ar_coeff_shift_minus_6: specifies the range of the auto-regressive
+ * coefficients. Values of 0, 1, 2, and 3 correspond to the ranges for
+ * auto-regressive coefficients of [-2, 2), [-1, 1), [-0.5, 0.5) and [-0.25,
+ * 0.25) respectively.
+ * @grain_scale_shift: specifies how much the Gaussian random numbers should be
+ * scaled down during the grain synthesis process.
+ * @cb_mult: represents a multiplier for the cb component used in derivation of
+ * the input index to the cb component scaling function.
+ * @cb_luma_mult: represents a multiplier for the average luma component used in
+ * derivation of the input index to the cb component scaling function.
+ * @cr_luma_mult: represents a multiplier for the average luma component used in
+ * derivation of the input index to the cr component scaling function.
+ * @cb_offset: represents an offset used in derivation of the input index to the
+ * cb component scaling function.
+ * @cr_offset: represents an offset used in derivation of the input index to the
+ * cr component scaling function.
+ * @reserved: padding field. Should be zeroed by applications.
+ */
+struct v4l2_ctrl_av1_film_grain {
+ __u8 flags;
+ __u8 cr_mult;
+ __u16 grain_seed;
+ __u8 film_grain_params_ref_idx;
+ __u8 num_y_points;
+ __u8 point_y_value[V4L2_AV1_MAX_NUM_Y_POINTS];
+ __u8 point_y_scaling[V4L2_AV1_MAX_NUM_Y_POINTS];
+ __u8 num_cb_points;
+ __u8 point_cb_value[V4L2_AV1_MAX_NUM_CB_POINTS];
+ __u8 point_cb_scaling[V4L2_AV1_MAX_NUM_CB_POINTS];
+ __u8 num_cr_points;
+ __u8 point_cr_value[V4L2_AV1_MAX_NUM_CR_POINTS];
+ __u8 point_cr_scaling[V4L2_AV1_MAX_NUM_CR_POINTS];
+ __u8 grain_scaling_minus_8;
+ __u8 ar_coeff_lag;
+ __u8 ar_coeffs_y_plus_128[V4L2_AV1_AR_COEFFS_SIZE];
+ __u8 ar_coeffs_cb_plus_128[V4L2_AV1_AR_COEFFS_SIZE];
+ __u8 ar_coeffs_cr_plus_128[V4L2_AV1_AR_COEFFS_SIZE];
+ __u8 ar_coeff_shift_minus_6;
+ __u8 grain_scale_shift;
+ __u8 cb_mult;
+ __u8 cb_luma_mult;
+ __u8 cr_luma_mult;
+ __u16 cb_offset;
+ __u16 cr_offset;
+ __u8 reserved[4];
+};
+
/* MPEG-compression definitions kept for backwards compatibility */
#define V4L2_CTRL_CLASS_MPEG V4L2_CTRL_CLASS_CODEC
#define V4L2_CID_MPEG_CLASS V4L2_CID_CODEC_CLASS
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index 8b61d77..397a99e 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -243,6 +243,7 @@ enum v4l2_colorspace {
/* DCI-P3 colorspace, used by cinema projectors */
V4L2_COLORSPACE_DCI_P3 = 12,
+
};
/*
@@ -474,7 +475,6 @@ struct v4l2_capability {
#define V4L2_CAP_META_CAPTURE 0x00800000 /* Is a metadata capture device */
#define V4L2_CAP_READWRITE 0x01000000 /* read/write systemcalls */
-#define V4L2_CAP_ASYNCIO 0x02000000 /* async I/O */
#define V4L2_CAP_STREAMING 0x04000000 /* streaming I/O ioctls */
#define V4L2_CAP_META_OUTPUT 0x08000000 /* Is a metadata output device */
@@ -549,6 +549,13 @@ struct v4l2_pix_format {
#define V4L2_PIX_FMT_RGBX32 v4l2_fourcc('X', 'B', '2', '4') /* 32 RGBX-8-8-8-8 */
#define V4L2_PIX_FMT_ARGB32 v4l2_fourcc('B', 'A', '2', '4') /* 32 ARGB-8-8-8-8 */
#define V4L2_PIX_FMT_XRGB32 v4l2_fourcc('B', 'X', '2', '4') /* 32 XRGB-8-8-8-8 */
+#define V4L2_PIX_FMT_RGBX1010102 v4l2_fourcc('R', 'X', '3', '0') /* 32 RGBX-10-10-10-2 */
+#define V4L2_PIX_FMT_RGBA1010102 v4l2_fourcc('R', 'A', '3', '0') /* 32 RGBA-10-10-10-2 */
+#define V4L2_PIX_FMT_ARGB2101010 v4l2_fourcc('A', 'R', '3', '0') /* 32 ARGB-2-10-10-10 */
+
+/* RGB formats (6 or 8 bytes per pixel) */
+#define V4L2_PIX_FMT_BGR48_12 v4l2_fourcc('B', '3', '1', '2') /* 48 BGR 12-bit per component */
+#define V4L2_PIX_FMT_ABGR64_12 v4l2_fourcc('B', '4', '1', '2') /* 64 BGRA 12-bit per component */
/* Grey formats */
#define V4L2_PIX_FMT_GREY v4l2_fourcc('G', 'R', 'E', 'Y') /* 8 Greyscale */
@@ -556,6 +563,7 @@ struct v4l2_pix_format {
#define V4L2_PIX_FMT_Y6 v4l2_fourcc('Y', '0', '6', ' ') /* 6 Greyscale */
#define V4L2_PIX_FMT_Y10 v4l2_fourcc('Y', '1', '0', ' ') /* 10 Greyscale */
#define V4L2_PIX_FMT_Y12 v4l2_fourcc('Y', '1', '2', ' ') /* 12 Greyscale */
+#define V4L2_PIX_FMT_Y012 v4l2_fourcc('Y', '0', '1', '2') /* 12 Greyscale */
#define V4L2_PIX_FMT_Y14 v4l2_fourcc('Y', '1', '4', ' ') /* 14 Greyscale */
#define V4L2_PIX_FMT_Y16 v4l2_fourcc('Y', '1', '6', ' ') /* 16 Greyscale */
#define V4L2_PIX_FMT_Y16_BE v4l2_fourcc_be('Y', '1', '6', ' ') /* 16 Greyscale BE */
@@ -563,6 +571,7 @@ struct v4l2_pix_format {
/* Grey bit-packed formats */
#define V4L2_PIX_FMT_Y10BPACK v4l2_fourcc('Y', '1', '0', 'B') /* 10 Greyscale bit-packed */
#define V4L2_PIX_FMT_Y10P v4l2_fourcc('Y', '1', '0', 'P') /* 10 Greyscale, MIPI RAW10 packed */
+#define V4L2_PIX_FMT_IPU3_Y10 v4l2_fourcc('i', 'p', '3', 'y') /* IPU3 packed 10-bit greyscale */
/* Palette formats */
#define V4L2_PIX_FMT_PAL8 v4l2_fourcc('P', 'A', 'L', '8') /* 8 8-bit palette */
@@ -586,7 +595,18 @@ struct v4l2_pix_format {
#define V4L2_PIX_FMT_XYUV32 v4l2_fourcc('X', 'Y', 'U', 'V') /* 32 XYUV-8-8-8-8 */
#define V4L2_PIX_FMT_VUYA32 v4l2_fourcc('V', 'U', 'Y', 'A') /* 32 VUYA-8-8-8-8 */
#define V4L2_PIX_FMT_VUYX32 v4l2_fourcc('V', 'U', 'Y', 'X') /* 32 VUYX-8-8-8-8 */
+#define V4L2_PIX_FMT_YUVA32 v4l2_fourcc('Y', 'U', 'V', 'A') /* 32 YUVA-8-8-8-8 */
+#define V4L2_PIX_FMT_YUVX32 v4l2_fourcc('Y', 'U', 'V', 'X') /* 32 YUVX-8-8-8-8 */
#define V4L2_PIX_FMT_M420 v4l2_fourcc('M', '4', '2', '0') /* 12 YUV 4:2:0 2 lines y, 1 line uv interleaved */
+#define V4L2_PIX_FMT_YUV48_12 v4l2_fourcc('Y', '3', '1', '2') /* 48 YUV 4:4:4 12-bit per component */
+
+/*
+ * YCbCr packed format. For each Y2xx format, xx bits of valid data occupy the MSBs
+ * of the 16 bit components, and 16-xx bits of zero padding occupy the LSBs.
+ */
+#define V4L2_PIX_FMT_Y210 v4l2_fourcc('Y', '2', '1', '0') /* 32 YUYV 4:2:2 */
+#define V4L2_PIX_FMT_Y212 v4l2_fourcc('Y', '2', '1', '2') /* 32 YUYV 4:2:2 */
+#define V4L2_PIX_FMT_Y216 v4l2_fourcc('Y', '2', '1', '6') /* 32 YUYV 4:2:2 */
/* two planes -- one Y, one Cr + Cb interleaved */
#define V4L2_PIX_FMT_NV12 v4l2_fourcc('N', 'V', '1', '2') /* 12 Y/CbCr 4:2:0 */
@@ -595,12 +615,15 @@ struct v4l2_pix_format {
#define V4L2_PIX_FMT_NV61 v4l2_fourcc('N', 'V', '6', '1') /* 16 Y/CrCb 4:2:2 */
#define V4L2_PIX_FMT_NV24 v4l2_fourcc('N', 'V', '2', '4') /* 24 Y/CbCr 4:4:4 */
#define V4L2_PIX_FMT_NV42 v4l2_fourcc('N', 'V', '4', '2') /* 24 Y/CrCb 4:4:4 */
+#define V4L2_PIX_FMT_P010 v4l2_fourcc('P', '0', '1', '0') /* 24 Y/CbCr 4:2:0 10-bit per component */
+#define V4L2_PIX_FMT_P012 v4l2_fourcc('P', '0', '1', '2') /* 24 Y/CbCr 4:2:0 12-bit per component */
/* two non contiguous planes - one Y, one Cr + Cb interleaved */
#define V4L2_PIX_FMT_NV12M v4l2_fourcc('N', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 */
#define V4L2_PIX_FMT_NV21M v4l2_fourcc('N', 'M', '2', '1') /* 21 Y/CrCb 4:2:0 */
#define V4L2_PIX_FMT_NV16M v4l2_fourcc('N', 'M', '1', '6') /* 16 Y/CbCr 4:2:2 */
#define V4L2_PIX_FMT_NV61M v4l2_fourcc('N', 'M', '6', '1') /* 16 Y/CrCb 4:2:2 */
+#define V4L2_PIX_FMT_P012M v4l2_fourcc('P', 'M', '1', '2') /* 24 Y/CbCr 4:2:0 12-bit per component */
/* three planes - Y Cb, Cr */
#define V4L2_PIX_FMT_YUV410 v4l2_fourcc('Y', 'U', 'V', '9') /* 9 YUV 4:1:0 */
@@ -622,10 +645,16 @@ struct v4l2_pix_format {
#define V4L2_PIX_FMT_NV12_4L4 v4l2_fourcc('V', 'T', '1', '2') /* 12 Y/CbCr 4:2:0 4x4 tiles */
#define V4L2_PIX_FMT_NV12_16L16 v4l2_fourcc('H', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 16x16 tiles */
#define V4L2_PIX_FMT_NV12_32L32 v4l2_fourcc('S', 'T', '1', '2') /* 12 Y/CbCr 4:2:0 32x32 tiles */
+#define V4L2_PIX_FMT_NV15_4L4 v4l2_fourcc('V', 'T', '1', '5') /* 15 Y/CbCr 4:2:0 10-bit 4x4 tiles */
+#define V4L2_PIX_FMT_P010_4L4 v4l2_fourcc('T', '0', '1', '0') /* 12 Y/CbCr 4:2:0 10-bit 4x4 macroblocks */
+#define V4L2_PIX_FMT_NV12_8L128 v4l2_fourcc('A', 'T', '1', '2') /* Y/CbCr 4:2:0 8x128 tiles */
+#define V4L2_PIX_FMT_NV12_10BE_8L128 v4l2_fourcc_be('A', 'X', '1', '2') /* Y/CbCr 4:2:0 10-bit 8x128 tiles */
/* Tiled YUV formats, non contiguous planes */
#define V4L2_PIX_FMT_NV12MT v4l2_fourcc('T', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 64x32 tiles */
#define V4L2_PIX_FMT_NV12MT_16X16 v4l2_fourcc('V', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 16x16 tiles */
+#define V4L2_PIX_FMT_NV12M_8L128 v4l2_fourcc('N', 'A', '1', '2') /* Y/CbCr 4:2:0 8x128 tiles */
+#define V4L2_PIX_FMT_NV12M_10BE_8L128 v4l2_fourcc_be('N', 'T', '1', '2') /* Y/CbCr 4:2:0 10-bit 8x128 tiles */
/* Bayer formats - see http://www.siliconimaging.com/RGB%20Bayer.htm */
#define V4L2_PIX_FMT_SBGGR8 v4l2_fourcc('B', 'A', '8', '1') /* 8 BGBG.. GRGR.. */
@@ -697,10 +726,16 @@ struct v4l2_pix_format {
#define V4L2_PIX_FMT_VP8 v4l2_fourcc('V', 'P', '8', '0') /* VP8 */
#define V4L2_PIX_FMT_VP8_FRAME v4l2_fourcc('V', 'P', '8', 'F') /* VP8 parsed frame */
#define V4L2_PIX_FMT_VP9 v4l2_fourcc('V', 'P', '9', '0') /* VP9 */
+#define V4L2_PIX_FMT_VP9_FRAME v4l2_fourcc('V', 'P', '9', 'F') /* VP9 parsed frame */
#define V4L2_PIX_FMT_HEVC v4l2_fourcc('H', 'E', 'V', 'C') /* HEVC aka H.265 */
#define V4L2_PIX_FMT_FWHT v4l2_fourcc('F', 'W', 'H', 'T') /* Fast Walsh Hadamard Transform (vicodec) */
#define V4L2_PIX_FMT_FWHT_STATELESS v4l2_fourcc('S', 'F', 'W', 'H') /* Stateless FWHT (vicodec) */
#define V4L2_PIX_FMT_H264_SLICE v4l2_fourcc('S', '2', '6', '4') /* H264 parsed slices */
+#define V4L2_PIX_FMT_HEVC_SLICE v4l2_fourcc('S', '2', '6', '5') /* HEVC parsed slices */
+#define V4L2_PIX_FMT_AV1_FRAME v4l2_fourcc('A', 'V', '1', 'F') /* AV1 parsed frame */
+#define V4L2_PIX_FMT_SPK v4l2_fourcc('S', 'P', 'K', '0') /* Sorenson Spark */
+#define V4L2_PIX_FMT_RV30 v4l2_fourcc('R', 'V', '3', '0') /* RealVideo 8 */
+#define V4L2_PIX_FMT_RV40 v4l2_fourcc('R', 'V', '4', '0') /* RealVideo 9 & 10 */
/* Vendor-specific formats */
#define V4L2_PIX_FMT_CPIA1 v4l2_fourcc('C', 'P', 'I', 'A') /* cpia1 YUV */
@@ -734,11 +769,17 @@ struct v4l2_pix_format {
#define V4L2_PIX_FMT_Z16 v4l2_fourcc('Z', '1', '6', ' ') /* Depth data 16-bit */
#define V4L2_PIX_FMT_MT21C v4l2_fourcc('M', 'T', '2', '1') /* Mediatek compressed block mode */
#define V4L2_PIX_FMT_MM21 v4l2_fourcc('M', 'M', '2', '1') /* Mediatek 8-bit block mode, two non-contiguous planes */
+#define V4L2_PIX_FMT_MT2110T v4l2_fourcc('M', 'T', '2', 'T') /* Mediatek 10-bit block tile mode */
+#define V4L2_PIX_FMT_MT2110R v4l2_fourcc('M', 'T', '2', 'R') /* Mediatek 10-bit block raster mode */
#define V4L2_PIX_FMT_INZI v4l2_fourcc('I', 'N', 'Z', 'I') /* Intel Planar Greyscale 10-bit and Depth 16-bit */
#define V4L2_PIX_FMT_CNF4 v4l2_fourcc('C', 'N', 'F', '4') /* Intel 4-bit packed depth confidence information */
#define V4L2_PIX_FMT_HI240 v4l2_fourcc('H', 'I', '2', '4') /* BTTV 8-bit dithered RGB */
+#define V4L2_PIX_FMT_QC08C v4l2_fourcc('Q', '0', '8', 'C') /* Qualcomm 8-bit compressed */
+#define V4L2_PIX_FMT_QC10C v4l2_fourcc('Q', '1', '0', 'C') /* Qualcomm 10-bit compressed */
+#define V4L2_PIX_FMT_AJPG v4l2_fourcc('A', 'J', 'P', 'G') /* Aspeed JPEG */
+#define V4L2_PIX_FMT_HEXTILE v4l2_fourcc('H', 'X', 'T', 'L') /* Hextile compressed */
-/* 10bit raw bayer packed, 32 bytes for every 25 pixels, last LSB 6 bits unused */
+/* 10bit raw packed, 32 bytes for every 25 pixels, last LSB 6 bits unused */
#define V4L2_PIX_FMT_IPU3_SBGGR10 v4l2_fourcc('i', 'p', '3', 'b') /* IPU3 packed 10-bit BGGR bayer */
#define V4L2_PIX_FMT_IPU3_SGBRG10 v4l2_fourcc('i', 'p', '3', 'g') /* IPU3 packed 10-bit GBRG bayer */
#define V4L2_PIX_FMT_IPU3_SGRBG10 v4l2_fourcc('i', 'p', '3', 'G') /* IPU3 packed 10-bit GRBG bayer */
@@ -950,6 +991,7 @@ struct v4l2_requestbuffers {
#define V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS (1 << 4)
#define V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF (1 << 5)
#define V4L2_BUF_CAP_SUPPORTS_MMAP_CACHE_HINTS (1 << 6)
+#define V4L2_BUF_CAP_SUPPORTS_MAX_NUM_BUFFERS (1 << 7)
/**
* struct v4l2_plane - plane info for multi-planar buffers
@@ -1540,7 +1582,8 @@ struct v4l2_bt_timings {
((bt)->width + V4L2_DV_BT_BLANKING_WIDTH(bt))
#define V4L2_DV_BT_BLANKING_HEIGHT(bt) \
((bt)->vfrontporch + (bt)->vsync + (bt)->vbackporch + \
- (bt)->il_vfrontporch + (bt)->il_vsync + (bt)->il_vbackporch)
+ ((bt)->interlaced ? \
+ ((bt)->il_vfrontporch + (bt)->il_vsync + (bt)->il_vbackporch) : 0))
#define V4L2_DV_BT_FRAME_HEIGHT(bt) \
((bt)->height + V4L2_DV_BT_BLANKING_HEIGHT(bt))
@@ -1631,7 +1674,7 @@ struct v4l2_input {
__u8 name[32]; /* Label */
__u32 type; /* Type of input */
__u32 audioset; /* Associated audios (bitfield) */
- __u32 tuner; /* enum v4l2_tuner_type */
+ __u32 tuner; /* Tuner index */
v4l2_std_id std;
__u32 status;
__u32 capabilities;
@@ -1718,6 +1761,8 @@ struct v4l2_ext_control {
__u8 *p_u8;
__u16 *p_u16;
__u32 *p_u32;
+ __s32 *p_s32;
+ __s64 *p_s64;
struct v4l2_area *p_area;
struct v4l2_ctrl_h264_sps *p_h264_sps;
struct v4l2_ctrl_h264_pps *p_h264_pps;
@@ -1730,6 +1775,19 @@ struct v4l2_ext_control {
struct v4l2_ctrl_mpeg2_sequence *p_mpeg2_sequence;
struct v4l2_ctrl_mpeg2_picture *p_mpeg2_picture;
struct v4l2_ctrl_mpeg2_quantisation *p_mpeg2_quantisation;
+ struct v4l2_ctrl_vp9_compressed_hdr *p_vp9_compressed_hdr_probs;
+ struct v4l2_ctrl_vp9_frame *p_vp9_frame;
+ struct v4l2_ctrl_hevc_sps *p_hevc_sps;
+ struct v4l2_ctrl_hevc_pps *p_hevc_pps;
+ struct v4l2_ctrl_hevc_slice_params *p_hevc_slice_params;
+ struct v4l2_ctrl_hevc_scaling_matrix *p_hevc_scaling_matrix;
+ struct v4l2_ctrl_hevc_decode_params *p_hevc_decode_params;
+ struct v4l2_ctrl_av1_sequence *p_av1_sequence;
+ struct v4l2_ctrl_av1_tile_group_entry *p_av1_tile_group_entry;
+ struct v4l2_ctrl_av1_frame *p_av1_frame;
+ struct v4l2_ctrl_av1_film_grain *p_av1_film_grain;
+ struct v4l2_ctrl_hdr10_cll_info *p_hdr10_cll_info;
+ struct v4l2_ctrl_hdr10_mastering_display *p_hdr10_mastering_display;
void *ptr;
};
} __attribute__ ((packed));
@@ -1790,6 +1848,20 @@ enum v4l2_ctrl_type {
V4L2_CTRL_TYPE_MPEG2_QUANTISATION = 0x0250,
V4L2_CTRL_TYPE_MPEG2_SEQUENCE = 0x0251,
V4L2_CTRL_TYPE_MPEG2_PICTURE = 0x0252,
+
+ V4L2_CTRL_TYPE_VP9_COMPRESSED_HDR = 0x0260,
+ V4L2_CTRL_TYPE_VP9_FRAME = 0x0261,
+
+ V4L2_CTRL_TYPE_HEVC_SPS = 0x0270,
+ V4L2_CTRL_TYPE_HEVC_PPS = 0x0271,
+ V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS = 0x0272,
+ V4L2_CTRL_TYPE_HEVC_SCALING_MATRIX = 0x0273,
+ V4L2_CTRL_TYPE_HEVC_DECODE_PARAMS = 0x0274,
+
+ V4L2_CTRL_TYPE_AV1_SEQUENCE = 0x280,
+ V4L2_CTRL_TYPE_AV1_TILE_GROUP_ENTRY = 0x281,
+ V4L2_CTRL_TYPE_AV1_FRAME = 0x282,
+ V4L2_CTRL_TYPE_AV1_FILM_GRAIN = 0x283,
};
/* Used in the VIDIOC_QUERYCTRL ioctl for querying controls */
@@ -1845,6 +1917,7 @@ struct v4l2_querymenu {
#define V4L2_CTRL_FLAG_HAS_PAYLOAD 0x0100
#define V4L2_CTRL_FLAG_EXECUTE_ON_WRITE 0x0200
#define V4L2_CTRL_FLAG_MODIFY_LAYOUT 0x0400
+#define V4L2_CTRL_FLAG_DYNAMIC_ARRAY 0x0800
/* Query flags, to be ORed with the control ID */
#define V4L2_CTRL_FLAG_NEXT_CTRL 0x80000000
@@ -2352,6 +2425,7 @@ struct v4l2_event_vsync {
#define V4L2_EVENT_CTRL_CH_VALUE (1 << 0)
#define V4L2_EVENT_CTRL_CH_FLAGS (1 << 1)
#define V4L2_EVENT_CTRL_CH_RANGE (1 << 2)
+#define V4L2_EVENT_CTRL_CH_DIMENSIONS (1 << 3)
struct v4l2_event_ctrl {
__u32 changes;
@@ -2474,6 +2548,9 @@ struct v4l2_dbg_chip_info {
* @flags: additional buffer management attributes (ignored unless the
* queue has V4L2_BUF_CAP_SUPPORTS_MMAP_CACHE_HINTS capability
* and configured for MMAP streaming I/O).
+ * @max_num_buffers: if V4L2_BUF_CAP_SUPPORTS_MAX_NUM_BUFFERS capability flag is set
+ * this field indicate the maximum possible number of buffers
+ * for this queue.
* @reserved: future extensions
*/
struct v4l2_create_buffers {
@@ -2483,7 +2560,8 @@ struct v4l2_create_buffers {
struct v4l2_format format;
__u32 capabilities;
__u32 flags;
- __u32 reserved[6];
+ __u32 max_num_buffers;
+ __u32 reserved[5];
};
/*
@@ -2594,5 +2672,10 @@ struct v4l2_create_buffers {
/* Deprecated definitions kept for backwards compatibility */
#define V4L2_PIX_FMT_HM12 V4L2_PIX_FMT_NV12_16L16
#define V4L2_PIX_FMT_SUNXI_TILED_NV12 V4L2_PIX_FMT_NV12_32L32
+/*
+ * This capability was never implemented, anyone using this cap should drop it
+ * from their code.
+ */
+#define V4L2_CAP_ASYNCIO 0x02000000
#endif /* __LINUX_VIDEODEV2_H */